Autel IM608 and G Box Program Mercedes W207 All Keys Lost

How-to use the Autel G Box for Mercedes fast password calculation and write key to a Benz W207 with MaxiIM IM608 when all keys lost.

Step 1: Calculate password
Step 2: Generate Key File
Step 3: Write Key


Step 1: Calculate password
In IM608 select IMMO->Mercedes->Expert Mode->Password calculation->All keys lost (Fast)

Check G-Box all keys lost instructions

Select On bench->W207

Follow notes to connect G-box with IM608 and EIS
Remove the EIS from the vehicle. Correctly connect the EIS to the G Box

Connect G box with XP400 OBD connector
Connect G box with power adapter

Press OK to read password
Follow 5 steps to calculate pass:

1) Connect the device, OBD cable and OBD connector on the wiring harness in sequence
2) Connect the IR key simulator (APB102) to the programmer
3) Insert the IR key simulator into EIS (if already inserted, remove and insert it again), start collecting data

4) Collecting data, calculating password
Ther process takes 10-50 mins. Ensure that the device and vehicle battery are stable and sufficient during the process.

5) Password calculation completed

Step 2: Generate Key File
Select Generate Key File function

Check and confirm vehicle information
Autel IM608 automatically enter 16-digit key password to access

Select an unused key position, i,e Key number 6
Choose V51 key

Succeeded to generate key file

Step 3: Write Key
Insert a third party blank key into the infrared key hole on the xp400 programmer

Select Write Key->IR->Write BE key file

Select key6 file

Communicating with the key

Write key success
Test the new key.
Done.

www.obdii365.com

Autel IM508 IM608 Adds Perodua IMMO Models

Auro OtoSys IM600 and Autel MaxiIM IM608/IM508 updated Perodua immobilizer key programming Models


Support following Malaysia Perodua vehicles:
Alza
Axia
Ayla
Copen
Gran max
Kancil
Kelisa
Kembara
Kenari
Myvi
Sirion
Terios
Viva
Xenia
Sigra
Bezza
Rusa
Other

www.obdii365.com

Autel IM508 Program Hyundai SANTA FE 2015 All Keys Lost

How to read Hyundai SANTA FE 2015 ID47 pin code and program smart key with Autel MaxiIM IM508 (IM608) when all keys lost via OBD.

3-button smart key with ID47 chip


Step 1: Read Pin Code

Select IMMO->Hyundai->System Selection->Read PIN Code-> Read PIN Code (47 Smart Card)

Press the Start button. Turn on the Hazard warning light.
Reading password in progress

Read 6-digit pin code success

Step 2: Program new key 
Select Smart Key System

Select smart key type. If don't know which type, try them one by one.
We have tried several types, all failed to communicate. Finally the Smart type 7 (CAN) works.

Choose Immobilizer remote control learning

Press the Start button
Select Smart Key Programming

Perform this function requires all keys to be re-learned.
Turn off ignition Instrument screen is black.
Open and close driver door once.
Autel IM508 asks to enter 6-digit pin code to access.

Manually input pin code and confirm
Click OK to complete the following steps:
Within 5s after OK is pressed,  use the back or top of the smart key to hold down the START button for 5s until the immo lamps flash.
(If the operation failed with the prompts, remove the key case and re-execute the above steps so that the key chip can be successfully programmed)

Programming completed.

Test remote control and start vehicle with the new key.

Done.
www.obdii365.com

Autel IM508 Program Nissan Navara 2011 Remote Key

How-to: program Nissan Navara year 2011 remote key by using Autel MaxiIM IM508/ IM608 key programmer.

Connect IM508 with vehicle via OBD socket
Immobilizer->Nissan->System Selection->4 Digital Pin Code

Turn on the hazard warning light
illuminate the instrument cluster before the operation

Open and close the driver door once
Scanning the vehicle system
Remote-System->Remote System 1->Teach transmitter

Turn ignition switch from the OFF position to the ON position

Teach success
Test the remote control

Install key with key shell.
Done.

Related post:
Program Nissan Navara 2011 Remote Key with OBDSTAR X300 DP Plus