How to Solve Autel IM608 BMW FEM All Keys Lost Car Not Start

 Here comes a similar problem:

Autel IM608 PRO programs BMW 420d 2014 all keys lost, everything went nice and smooth extracting all info from FEM and also getting ISN code from ECU, now keys are programmed but car didn’t start. I had these errors after I run a test. but unsure what problem would be.

Solution:

FEM module is not encoded which is shown on picture 1.

Restore coding to FEM.

Restore original coding file to FEM module.

WWW.OBDII365.COM

Program 2023 Lexus IS300 All Keys Lost with Autel KM100

 2023 Lexus IS300 all smart keys lost is done by Autel MaxiIM KM100. The device makes the lost key by itself. It does not need to backup immo data or need a 12-digit outcode.

 

Procedure:

Connect VCI with OBD, pair KM100 with VCI200 via bluetooth.

Select IMMO->Lexus->Manual Selection->USA->IS300->2016-2020->Smart Key->Control Unit-> Keyless System (CAN)

Read number of keys. 2 keys were programmed.

Failed to backup immo data on this model.
So we do a smart box reset.
Smart box reset succeed.

Add smart key

Learn key succeeded.

If remote control is not working, follow instruction here to enable remote keyless function.

Toyota Camry 2022/2023 Car Starts Remote Not Working Solution

Autel MaxiIM KM100 does have the ECU Synchronization Learning Function Follow this function route on the KM100 IMMO – Lexus – System Selection – Keyless System – Keyless System (CAN) – ECU Synchronization Learning

Autel IM608 Failed to Program 2019 Dodge Ram Key Solution

 Here comes a similar problem:

2019 Dodge Ram DT 1500. Autel IM608 pulled pin code but would fail every time to program key. I thought it was a key issue but another tool (code cannibal) programmed no problem. I used the same star cable for both tools.

I was successful with a Ram with autel before too, but seems like only certain part numbers are supported. I tried every variable with autel on this one and nothing worked.

Solution:

Autel doesn’t program key for Dodge Ram of the big radio. G2 turbo same thing.

The best tool to program key for this is Xtool. Never had an issue with xtool.

code cannibal or obdstar x300 dp plus will do it without problem as well.

obdstar will pull Pin Code and program key for 2020 Dodge Ram 1500/ 2018-2020 Dodge Ram 2500/ 2018-2020 Dodge Ram 3500. 

– Requires Can Gateway Bypass Cable, Star Connector, or CanBus Probe
– Program Keys and Ability to Exit/Enter Transport Mode (Shipping Mode)

What Tool to Program Iveco Daily 2021 All Keys Lost?

 Any idea what tool to make all keys lost for Iveco Daily 2020 onwards? Avdi, smart pro or autel im608? There is no communication with bcm via OBD. Maybe they blocked the bcm through the OBD. How to program all keys lost?

 

 

Try do it by eeprom dump.

AVDI abrites will do it but not by obd but from the dump, you will need to read the bcm dump via eeprom or with abprog , then use the keymaker tool on abrites fca software to precode the key and get pin , you can then program the key to the vehicle , iveco daily after 2020 was part of the newly released functions.

 

“With the latest version V8.9 of the ABRITES Diagnostics for FCA vehiclesyou are now able to prepare transponders for Fiat Ducato, Iveco Daily and Fiat 500L, manufactured after 2020. You need to read the external EEPROM from the BCM module using the ABPROG Programmer, then load the file in the Transponder Maker to prepare a key. The prepared key can then be programmed via the Key Learning menu.”

 

Feedback:

The car finally started, using abrites by reading the eeprom.

The BCM in my case is Magneti Marelli,  10 to 15 minutes max to remove BCM.  The only thing this take care about the pins when you try open the plastic cover. Very fragil.

Some pointed out that it can also be done using autel im608.