Autel IM508S Failed to Read BMW EWS3 Data Solution

 Problem:

Program key for bmw m3 e46 year 2000 with ews3 immobilizer mask 0D46J using Autel IM508S XP400 Pro. I have ews3 adapter connected on the ews3. But reading with autel using ews3 adapter failed to communicate.

Error: “Communication error of the programmer.”

Images attached:

Solution:

There is not enough voltage of the USB cable on the IM508S.

For EWS3, Autel engineer suggests reading EWS3 data with XP400 Pro PC software on Windows. Then write key with IM508S.

Requires 12V power supply to the XP400 Pro.

Free download XP400 Pro PC software V2.80

 

Check how to use XP400 Pro software here

Where to Download Autel XP400 Pro PC Software?

Autel IM608 Toyota “New Key Registered” Solution

 Problem:

Programmed a smart key into a 2023 Toyota Yaris Cross using Autel IM608 II, and it works fine but when you get in the car to start it, it says “new key registered, contact dealer”. But it works fine and is registered correctly in the system. How I can delete it?

The error happens on new Toyotas often.  This is normal on all new Toyota.

Drive it for a while/a couple of days/weeks, it will go away!!!

It’s part of the Toyota security and the key needs to be linked with Toyota.

 

That’s some of the new features in Toyota to let the owner know that there is a new key programmed to the car in case you did not approve a new key and someone made a copy while you were not there. If all works fine and there is no codes it should go away in a few start cycles.

 

 

www.obdii365.com

Autel IM608 II Unlock Renault Clio V Gateway Error Code 17?

 Problem:

Tried to program smart key for Renault Clio V 2020 with Autel IM608 II Pro. I purchased 2 tokens in the device. But still failed to unlock security gateway.

“Lock failed.

Error message: Response failed. Unable to obtain the key to unlock the gateway. Please contact customer service.

code=17 ”

Same as IM508S.

Here is the clue.

Due to some technical reasons, the Renault safety gateway unlock feature will no longer be supported from the Autel MaxiIM series.
If customers need to unlock the safety gateway, they can try alternative solutions, such as use Renault gateway bypass adapter or using the diagnostic function to unlock the gateway first, then proceed with the IM functionality.

The Renault gateway unlock token is only used to unlock security gateway to perform diagnostic functions (active test, special functions).

For Immobilizer functions, you need to hook up the Renault gateway adapter.

For 2019- Renault Clio V/Captur II, you can also remove HFM to read pin from dump using APB131 adapter.
Renault menu: IMMO-Renault-Clio v-Key Learning, unit programming, choose remote learning.

Read VAG EDC17CP14 ECU CS PIN with Autel IM508

 If you wish to fit a VAG EDC17 replacement ecu for any reason or program all keys lost you will need the pincode of the new one and the old one. With these codes you can match the immobiliser to the new ecu. Here we will show how to read VW EDC17 Security Pin Code with Autel IM508.

Take EDC17CP14 ECU as an example.

Connect EDC17 ECU with Autel IM508 via Gbox or 3rd party EDC17 adapter from ebay/aliexpress.

Read VIN and select model, here it’s Europe Golf 2009-2014

Select Control Unit->Engine->Bosch EDC17 Engine-> Read IMMO data in direct mode.

This ECU is read in direct mode. Make sure you have set up the connection. Then press Read to read IMMO data.

Hit No we don’t use Gbox.

Reading immo data in process.

Read EDC17 ECU CS and Pin code successfully.

 

http://blog.obdii365.com/2024/12/16/autel-im508-read-vw-edc17-security-pin-code-cs/

Autel IM608 Program 2014 VW Passat All Keys Lost via OBD

 User review:

All keys lost on a 2014 Volkswagen Passat push to start!! This car gave me a lot of trouble in the beginning but after trying to put the key in the system 3 different ways it finally worked.

2 Service mode failed. and OBD mode succeeded. Using Autel IM608 II pro.

OBD mode procedure:

Step 1: Read the IMMO data from ECM
Step 2: Read the power class from ECM
Step 3: Modify the IMMO data of instrument cluster in all keys lost mode
Step 4: Use the programmer to generate a dealer key
Step 5: Learn keys to the IMMO system of the vehicle

Images attached:

Autel IM508 Read VAG MQB Locked ELV via APB131

 In the November 2024 update,  Autel MaxiIM IM508/IM608 adds an integrated mqb2 calculator. It is possible to do All keys lost on VAG MQB models without DSG gearbox and without steering lock with data from the engine ecu.  Cars like Golf Polo Fabia etc with manual gearbox and remote key.

Check info. here

How to Calculate VAG MQB AKL Sync Data with Autel IM508 IM608?

With the latest Autel update, you can now read locked steering lock and decode immo data.

That means once you have entered data, you can do the akl on even automatic cars, not just manual. For synchrony of ELV push button, GTI, Audi A3, Tiguan, etc.

Autel has done it again. Now supports decode ELV 3Q0905861 and 5Q0905861. Keep updating…
Decoding ELV then get 16 bytes CS code. Then manually input data to MQB2 sync data calculator to get sync data for All keys lost.

To decode ELV data, you will need an APB131 adapter.

 

For example:

Read 5Q (5Q0905861) ELV 16 bytes

Another example:

Read and decode Tiguan 3Q (3Q0905861) ELV data.

Select Direct Column Lock function.

Select chip type 3Q0905861

Autel IM608 will show you wiring diagram of ELV 5Q.

Reading chip data using the programmer.

FYI:

With the latest update to xhorse vvdi2+multiprog you can read locked steering lock and decode immodata as well.

MultiProg database V44

+ VW PASSAT ELV(5K0905861)(D70F3624)-LOCK-READ,
VW PASSAT ELV(5K0905861)(D70F3624)-LOCK-WRITE,
VW SKODA SEAT(3Q0905861)(D70F3624)-LOCK-READ,
VW SKODA SEAT(3Q0905861)(D70F3624)-LOCK-WRITE
options in <Other>-><VW>-><VW>

http://blog.obdii365.com/2024/12/11/autel-im508-im608-decodes-vag-mqb-locked-elv-via-apb131/

Autel IM608 Program 2020 Ford Ranger All Keys Lost

 All keys lost 2020 Ford Ranger push to start with active alarm and no keypad. Failed with smart pro, FDRS, and im608 with gbox.

Usually FDRS programs with active alarms no issues. But failed to program this time.
Removed the bcm and read the D- Flash with Autel IM608 XP400 Pro! Work on the first try!

AUtel IM608 Program Dacia Logan 2024 Key

 Dacia Logan 2024 add key is done by OtoSys IM600 (the old Autel IM608) !

Need good network and battery support.

Do it with Renault SGW authorization token. If cannot purchase tokens in machine (IM508 old Android 4.42 tablet), buy SGW token online (contact https://wa.me/8618350207975).

Read Pflash and whole procedure takes 20 minutes.

How to Use Autel Toyota 8A Blade AKL Cable?

 Autel also has a set of Toyota 8A blade key AKL adapters for repairing lost keys in TOYOTA/LEXUS cars. These adapters unlock the 8A chip without having to remove the immobilizer box.

Compatible with IM608 and IM508.
Must be used with Autel G-Box3 and APB112
CAMRY, YARIS, VIOS, 4Runner, Avalon, Prius C, SEQUOI A, SIENNA, TACOMA, TUNDRA

Here we will show how to connect the Autel 8A blade AKL cable with Gbox2/3.

Example of use in Toyota Camry (each car may have different positions)
Step 1 Turn on the IM508/608,
enter the IMMO program->Toyota->Manual Selection->Camry->2015- -> Blade Key-> Control Unit-> Immobilizer (H 8A/8E) ->( All Keys Lost)
Step 2 Find the fuse box under the glove box. Remove the fuse IGN_No.1 (see the illustration below). Insert the IGN_FUSE in its place.

Step 3: Open the car hood to find the fuse box. Remove fuse number BAT_NO.1 and connect the B+ FUSE wire as shown in the picture.

Step 4: Remove the starter switch cover, pull out the KSW_NO.1 plug, and connect the KSW cable instead (as shown in the picture below).

Step 5 Connect the G-BOX and 8A AKL cable to the IM508/608 as shown in the figure below.

Step 6 The G-Box will automatically update for the first connection. The STATUS light on the G-Box will blink red and turn green after completion.

Step 7 Insert the key (without chip) and turn the key to ON.
Step 8 Press (OK) to read the information (it may take several minutes depending on the car model).
Step 9 Press (OK) to confirm the key type (SLK6) as shown in the image below.

Step 10 Connect APB112 to IM508/608. After connecting, the light will be blue indicating that it is ready to use.  Press (OK) to confirm the key type as shown in the picture below.

Step 11 APB112 will be updated the first time you connect.
Step 12 Simulator key generation is complete as shown in the figure below.

Step 13 Turn the key OFF, assemble the B+FUSE plug and IGN Fuse, KSW as before (assemble the car as before).
Step 14: Take the APB112 that was created as a simulator key and touch it to the side of the start switch, then insert the key (without the chip) and turn it ON
(now you can test the start).
Step 15 Press (OK) to connect the car, enter the Add Key menu,
turn the key OFF, pull it out and take out
the APB112 that was created as a simulator key.
Step 16 Insert the key (insert the H 8A chip), do not twist.
Step 17 Wait 5 to 180 seconds, key learning is successful, the immo light will be off.
Step 18 Test the start.

Real image sample in Toyota Revo
Fuse box under the storage compartment. Remove fuse IGN_No.1 (see illustration below). Insert IGN_FUSE in its place.


Open the car hood to find the fuse box, remove fuse number BAT_NO.1 and connect the B+ FUSE wire as shown in the picture.


Remove the starter switch cover, pull out the KSW_NO.1 plug, and connect the KSW cable instead (as shown in the picture below).