Program Audi A3 2012 All Keys Lost with Auro OtoSys IM100

This manual introduces how to conduct 2012 Audi A3 All Keys Lost on Auro OtoSys IM100 key programmer.


Two options are available when accessing the IMMO function:

 Smart Mode – the IM100 tablet will read the vehicle information to identify the IMMO type.

 Expert Mode – the user can make selections step by step to locate the IMMO type.

 Procedures before getting started:

1. Connect the IM100 tablet to the vehicle’s DLC via the included main cable for

both communication and power source.

2. Connect the IM100 tablet to the programmer UP200 via the included USB cable.

3. Make sure the user has access to WiFi service.


NOTE

Illustrations used in this manual are samples, and the actual testing screens may vary by

vehicle. Observe the menu titles and on-screen instructions to make correct selections

and operations.

All Keys Lost via Smart Mode

1. Turn on the IM100 tablet and connect to WiFi.

2. Tap OtoSys > IMMO. A vehicle menu displays and a disclaimer prompts up. Tap
Accept to continue.

3. Tap Audi on the vehicle menu.

4. Tap Smart Mode on the mode menu and the IM100 tablet automatically identifies

the vehicle information. Tap Yes to continue.

NOTE

You can click the pen icon near the top-right corner to record the operation data. If you

encounter any difficulties, click the icon again to send us the data and the problem, so

that our engineers could help.

5. Read the information of Key Learning, Key Add and other funcions if needed. Tap

OK to continue.

6. Check the key status and tap OK to continue

7. When the function menu displays, tap All keys lost.



NOTE

To perform the All Keys Lost function, the vehicle IMMO data will be modified and all the

keys that are original or subscribed by dealers will not be accepted. Tap Yes to continue

or tap No to quit the operation.

8. Once All Keys Lost starts, the IM100 tablet performs five steps to complete the

operation, i.e., Read IMMO Data, Read PowerClass, Modify IMMO Data, Make

Dealer Key and Learn Key.

9. When Read IMMO Data starts, follow the onscreen instruction to turn the ignition off

and then back to ON or turn on hazard lights, and then tap OK to continue.

10. Read the information of the IMMO data from engine, PowerClass from engine and

modified vehicle instrument IMMO data. Tap OK to continue.

11. When Make Dealer Key starts, follow the onscreen instruction to put a Blank Key

into the key slot of the UP200. Then tap OK to continue.

12. A “Make dealer key success!” message prompts up when the process is completed.

Tap Yes to repeat step 11 and make the next dealer key with a new key; tap No to

move to the next step, Learn Key.

13. When Learn Key starts, a “Does vehicle have Kessy?” message prompts up. Make

selection accordingly.

14. Input the number of keys to be learned and tap OK to continue.

15. Follow the onscreen instruction to insert the keys to be learned into the vehicle

ignition switch.

16. When a “Key learning completed!” message prompts up, tap OK to continue.

17. Follow the onscreen instruction to turn the ignition off and then back to ON. Tap OK

to complete All Keys Lost and exit.

All Keys Lost via Expert Mode

1. Turn on the OtoSys IM100 tablet and connect to WiFi.

2. Tap OtoSys > IMMO. A vehicle menu displays and a disclaimer prompts up. Tap

Accept to continue.

3. Tap Audi on the vehicle menu.

4. Tap Expert Mode on the mode menu.



NOTE

You can click the pen icon near the top-right corner to record the operation data. If you

encounter any difficulties, click the icon again to send us the data and the problem, so

that our engineers could help.

5. Tap Instrument CAN > VDO CDC32XX+24C32 Audi A3/TT/R8 to step by step

locate the IMMO type.

6. When the function menu displays, tap All Keys Lost (OBDII Mode).

NOTE

To perform the All Keys Lost function, the vehicle IMMO data will be modified and all the

keys that are original or subscribed by dealers will not be accepted. Tap Yes to continue

or tap No to quit the operation.

7. Once All Keys Lost starts, the IM100 tablet performs five steps to complete the

operation, i.e., Read IMMO Data, Read PowerClass, Modify IMMO Data, Make

Dealer Key and Learn Key.

8. When Read IMMO Data starts, follow the onscreen instruction to turn the ignition off

and then back to ON or turn on hazard lights, and then tap OK to continue.

9. Read the information of the IMMO data from engine, PowerClass from engine and

modified vehicle instrument IMMO data. Tap OK to continue.

10. When Make Dealer Key starts, follow the onscreen instruction to put a Blank Key

into the key slot of the UP200. Then tap OK to continue.

11. A “Make dealer key success!” message prompts up when the process is completed.

Tap Yes to repeat step 10 and make the next dealer key with a new key; tap No to

move to the next step, Learn Key.

12. When Learn Key starts, a “Does vehicle have Kessy?” message prompts up. Make

selection accordingly.

13. Input the number of keys to be learned and tap OK to continue.

14. Follow the onscreen instruction to insert the keys to be learned into the vehicle

ignition switch.

15. When a “Key learning completed!” message prompts up, tap OK to continue.

16. Follow the onscreen instruction to turn the ignition off and then back to ON. Tap OK

to complete All Keys Lost and exit.

http://www.obdii365.com/upload/pro/otosys-im100-2012-audi-a3-all-keys-lost.pdf