How-to: program 2023 Nissan Rogue smart key with Autel im508 and Nissan 40 pin bypass cable.
This is a 2023 Nissan Rogue, customer just boght it they don’t have a second key for it.
We need to program an OEM key to it. The aftermarket key trunk and remote start don’t work properly.
From 2022 onwards models you need the bypass connector. We got the OBDSTAR Nissan cable.
Take this fuse panel or fuse block out and then you will see the 40 pin connector of the HFM module.
It is not the black connector, it is the gray connector. Here we connect OBDSTAR Nissan 40 PIN cable.
Need need to manual select vehicle model and year. Do not do auto scan on these.
Go to IMMO Status scan->Add key (guided).
You put the key to get PIN verification, then you just go through the programming procedure.
Make sure when you are doing this you do not have the ignition on when you disconnect these connectors.
Make sure you disconnect everything with the ignition off.
Read also:
No comments:
Post a Comment