Can we clone PSA Peugeot/Citroen BSI (Built-in Systems Interface) with Autel MaxiIM IM608?
There is a clone option in the tool for BSI. Make sure the battery good and remove the wiper fuse.
Select car, manually select module - Clone BSI.
IM608 Citrone Peugeot software version V3.10 adds BSI clone function for the following 8 types:
CONTINENTAL_BSI_Q0X, JC_BSI04EV_K0X, JC_BSI04EV2_KEX, JC_BSI2004_H0X, VALEO_BSI_N0X,
VALEO_BSI2004_P0X, VALEO_BSIEV_X0X, and SIEMENS_BSI_S0X
On the PSA vehicles, the Autel IM608 has a very good range of day to day live data and functionality such as injector coding, full dpf activation and resetting etc. Nothing really more than any tool. 2 things it does offer that are different
1- Key coding. We have done dozens and it's brilliant, it literally just clicks and follow the instructions. Will do from around 2001 until present day.
2- BSI coding/replacement. As said above, make sure have good battery supply and network connection. Otherwise programming fails and car is dead.
We had a customer who had one bsi Jc controller that was dead after having programmed it with im608. Programing went to 98% then the car was dead after that.
We would recommend you swap flash and eeprom is safer than clone it over obd.
If you have eeprom in bsi it is easy just clone it, but if you have NEC mcu, you will be more difficult you must search for pinout of NEC reference on Autel and swap it.
Related reading: check BSI wiring diagram
No comments:
Post a Comment