Autel IM608 BMW FEM Failed to Process ECU Solution

 Problem:

I tried to renew this BMW F30 FEM module with Autel IM608 after I modified the m95126 eeprom when I go to process the ECU it fails at the end and the issue becomes non-responsive bricked.

Error “Programming failed, restore the EEPROM data to prevent loss of version information”

Any solution?

Solution:

1st try upgrade to flash supported version !

2nd special function ecu erasure, will delete everything on fem, renew as new, write vin and isn, program keys on car via OBD.

Go to System Selection->Immobilizer->FEM/BDC Immobilizer->Special function->ECU erasure reset.

This function will erase immobilizer data storaged in ECU, after that FEM/BDC will restore original module status without immobilizer data.

Network connection is required to perform this function.

www.obdii365.com