Here comes the user feedback:
2024 Nissan Rogue All smart keys lost, smartpro no go, Autel IM608 and APB131 for the win.
Used 40 pin special gateway cable for Nissan on the Smart Pro and failed.
Some rogue models have had a security update done at Dealer. The model is 100 % supported by SmartPro but apparently, there is a bulletin out about a Nissan security update that the dealer does and can’t be done.
“Some 2023-2024 Infiniti/Nissan have experienced a security update. Many will program with SmartPro software. However, if you can analyze the key but it failed to read the data during the next
step, that implies the vehicle has experienced a manufacturer’s security update that requires the Dealer tool for programming.”
This can happen on a Sentra as well.
Here is another example.
Nissan Sentra/Juke 2022 – Push Start. Connected with bypass cable to im608 and this message comes up asking for 28 digit code.
In this case, the car had a security update done at Dealer. Need to remove HFM module to read data and program key.
Autel did the job.
Tools Used: Autel IM608, APB131 adapter.
Need to remove HFM (Hands Free Module) and read pin from HFM dump.
No component removal only solder the board of HFM to read the data.
Here is a detailed guide on reading these Rouge/Sentra HFM and getting an AKL pin with apb131.
How to Read Nissan Rogue Sentra AKL 28-Digit PIN with Autel IM608 APB131
No comments:
Post a Comment