Question:
Is possible do it BMW F series coding with this Autel IM608 JVCI interface?
Autel make an enet to obd2 adapter. Its like an esys cable. You need it. Then you also need a usb to ethernet adapter as the enet cable needs an rj45 ethernet connection. Plug usb to ethernet adapter into one usb port, plug jvci into other one.
Turn wifi off so jvci connects via usb only.
Do NOT use a charger when programming or coding on bmws. You need a dedicated power supply to provide bulk current capacity, not so much voltage. Car can draw 20 amps just sitting there with ignition on. Theres a bunch of routines they run through during the processes, anything could be randomly switched on thatll double or triple the current draw. A battery charger cant accommodate that, itll draw that demand from the battery and the system voltage will drop. Its this that causes corruption and damage to modules.
This is why you need a dedicated power supply.
No comments:
Post a Comment