Autel IM508 XP400 Read Sprinter W906 EIS Key Password

 Autel IM508 & XP400 could read key password on Mercedes Sprinter EIS W906 via dump or via OBD directly. Here's the procedure on reading password via dump.

 

Follow im508 wiring diagram to connect EIS 906 with xp400 programmer

Select Programmer function->Chip->Chip read and write->Immobilizer->Mercedes Benz->EIZ(W906)MC9S12DT256->EEPROM->Read

Read data success. Save data.

Select Immobilizer function->Mercedes Benz->Manual selection->Sprinter->2006-2018->Fobik key

confirm vehicle information

Press Yes to continue
Select Control Unit->EIS tools->Load EIS data

upload data just saved

Loading files

Autel IM508 and XP400 Reading key password success

You can then make a key with it as normal obd but it only takes few minutes.

Then you just use the password to program via obd2? You dont write the key via the dump file?

 

www.obdii365.com

 

 

http://www.key-programmer.org/2021/03/26/autel-im508-xp400-read-sprinter-w906-key-password/

Autel IM608 Program Mercedes C250 2011 All Keys Lost

New feedback:

2012 Mercedes c250 all keys lost done on on vehicle in 20 minutes.

Most take over a hour that I do on vehicle. EASY MONEY.

Used Autel IM608 with G-box2.

How to Add Renault Capture 2016 Key by Autel IM608?

 As titled, which tool is the best to add key card to a Renault Capture 2016?

 

 

Suggestions:

Autel IM608 or IM508 + XP400

 

MaxiIM can add key via OBD or on bench.

Here is the success case by removing HFM

Renault Capture 2016 backup HFM, read PIN success, add key success

 

OBDSTAR X300 DP Plus

works both add key and all keys lost

AKL capture 2016 done by obdstar. With the converter green adapter.

 

 

Xtool (X100 PAD2, PAD3 etc)

I've done capture by obd2 fast and smooth with Xtool..

 

http://www.key-programmer.org/2021/03/25/which-tool-to-program-renault-capture-2016-key/

Autel IM608 Calculate MB W211 Password with MB Testing Tool

 The new Professional MB EIS ESL testing tool can be used to replace the Autel G-box2 to fast calculate Mercedes Benz password with MaxiIM IM608/IM508 on bench. Obdii365.com provides tutorial here on W209 W211 password retrieval with IM608 and MB test platform.

Follow wiring diagram here to connect devices

Connect mb testing tool with im608’s j2534 passthru vci via old cable

Connect mb testing tool with w211 EIS via w169 w171 w209 w211 w245 eis ezs cable

Turn on power and Test EIS ESL button and on the mb testing tool

The green indicator on the j2534 vci will turn on

In im608 select IMMO function ->Mercedes-benz-> Expert Selection -Get password->All keys lost (fast)

autel Im608 indicates akl function used together with g-box

Here the mb testing tool can replace g-box

Select on bench (g-box fast) and continue

Turn on g-box mode 2 and on bench buttons on the mb testing tool

Select w211

Im608 gives instruction to read password via box and apb112 emulator, press BEGIN to continue

Step 1: check device, obd cable and obd connector connection

Connecting to obtain data

Step 2: Insert the IR key simulator to the programmer (here we insert IR emulator into EIS)

Step 3: Insert IR emulator into EIS. If already inserted, remove and insert it again

Step 4: Getting password in progress

Turn off g-box2 mode on mb testing tool

Insert new key into EIS, turn on ignition and then off

Remove and insert key tun on ignition again

Successfully calculate password

The MB testing platform can be used to test ESL status, test gearbox, gateway and ECU on bench as well.

The MB testing tool is compatible with multi MB programmers including Autel, AVDI, VVDI MB,  Key Tool Plus pad, CGDI MB etc

Read also: Autel IM608 Calculate MB W208 W210 Password without G-Box

Autel IM608 Add old VAG Key Won't work Solution

 Test report:

Autel IM608 added a key successfully today on a 2007 Audi RS4 (ignition key with start button and a 2015 Audi A6 add key (smart key).

 

The RS4 wouldn’t add new key via ignition switch directly

Had to backup vehicle data (via OBD still), make dealer key, add key via ignition wouldn’t work, so key was added through xp400pro going through add key function (original key in ignition, new key remains in xp400).

Remote then added through remote system

Keyless go works.

Had similar problem on 2006 touareg auto vin said it was kessy 433 but I had to do it through smart mode it was not kessy and it was 315.

 

Seems that older VAG cars the automatically add key won't work, did a Skoda and VW caddy the other day, same problem, needed to read immo data, make dealer key, and adding via XP400.

http://www.key-programmer.org/2021/03/22/tips-to-add-a-2007-audi-rs4-key-by-autel-im608/

Autel IM608 IM508 Expended IMMO Till 2020

 Autel MaxiIM IM608 and IM508 new Update expanded immobilizer coverage through 2020

NEW Ready-to-Download Features & Coverage
Key programming and Read PIN for 2019-2020 Buick, Chevrolet, Cadillac and GMC; Key
programming use CANFD for 2020-2021 Onix and Tracker.
All keys lost without PIN or ECU replacement for Honda Accord/ Civic/Avancier/VEZEL.
All keys lost for 47 smart card for Mitsubishi.
All keys lost for transponder 8A for Subaru.
All keys lost for Volkswagen MQB system.
Key programming for 450,451,452,453,454 and All keys lost for 453 for Smart.
All keys lost for transponder 8A without programmer for Toyota/Lexus.
Key programming with PIN Bypass 2020 Mazda (Mazda 3/CX30).
Read PIN for transponder 4A for SPORTAGE(SLC) and LAFESTA(SQ) of Hyundai/Kia.
Add key without PIN for Nissan SYLPHY.
Read PIN for new software version of BMW FEM/BDC system.
Read ISN for BMW ECM MEVD17 and MSV90.
Key programming for blade key by programmer for 2007-2018 Sprinter in US.

TCP Purchase may be required if your tool's software subscription has expired.