Friday, April 27, 2018

Auro OtoSys IM600 Program Nissan X-tail 2017 Smart Key

Another test perfect model: Nissan x-Trail 2017 smart key programming with Auro otosys im600/Otosys IM100 key programmer.



Connect IM600/IM100 with vehicle via OBD socket 
Select IMMO function->Nissan->X-tail->2014/2-2017/2 ->Immobilizer/Smart system->When performing key registration ->Register key
auro-otosys-nissan-xtrail-1
auro-otosys-nissan-xtrail-2
auro-otosys-nissan-xtrail-3
auro-otosys-nissan-xtrail-4
auro-otosys-nissan-xtrail-5

Set the vehicle to the following status and then press OK.
-Ignition switch or power switch: LOCK
-Hazard switch :ON
-P(A/T) or neutral (M/T)
-Battery voltage: more than 12.5V
-Steering: Not in fully locked
auro-otosys-nissan-xtrail-6
Establishing communication
Register smart key:
Operate according to the following procedures:
1.Press push-button ignition switch once. Check that indicator on push button ignition blinks
2. Contact the smart key to push-button ignition switch within 5 seconds. Check buzzer in combination meter sounds twice. Caution: Contact the logo off the smart key to the center of the ignition switch. 
3.Check that turn ignition switch changes automatically to the ON position and that security indicator turns on 5 times. Check that push button ignition switch turns ON
4. Turn ignition switch to the OFF position. Wait for 5 seconds or more
5.A maximum of 4 smart keys can be registered by repeating procedure from step 1 to Step 3 using unregistered smart keys.
Press Next to end key registration mode. 

auro-otosys-nissan-xtrail-7

After key registration operation. the system returns to key registration, it is necessary to end operation. Do following procudure:

1. Press Push-button ignition switch once, check that indicator on push button turns on
2.Contact the registrar smart key to push button ignition switch within 5 seconds buzzer in the combination meter sounds twice.
3.Turn ignition off.Wait for 5 seconds ot more
4. Check that key warning lamp blinks 5 times when driver door is opened or closed
5. Check that security indicator blinks at intervals of approximately 3 seconds while ignition switch is in the OFF position
6. Operate registered smart key outside of the vehicle. Check that door lock and unlock
The status indicates that key regurgitation mode ends. 
auro-otosys-nissan-xtrail-8

auro-otosys-nissan-xtrail-9

New smart key can start vehicle.
auro-otosys-nissan-xtrail-10
Success.

If you are interested in AURO OtoSys IM600, please contact us:
Whatsapp : +86 18259252285
Skype: obdii365.com
E-Mail:sales@obdii365.com

No comments:

Post a Comment