Model: EU Ford Fiesta Blade key
Procedure:
In FordEU menu, select Fiesta-2002-2008-Blade key-Immobilizer (CAN)-Erase key
All keys will be erased. At least 2 keys are required for key learning to complete.
Turn on ignition switch
Security accessing. Wait about 3-10 minutes
Autel IM608 displayed number of learned keys: 2
Press OK to erase key
Easing successful
All known key has been erased. You must now program a minimum of 2 keys.
The engine will not start until you complete the following steps:
Perform the following steps to learn the ignition keys.
1. Turn ignition to OFF position
2. Turn the first key in the ignition to ON for 3s, then remove
3. Turn the next key in the ignition to ON for 3s, then remove
4. Choose Yes to add more keys, NO to complete the procedure
5. After you finish all necessary functions, confirm that all learned keys can start
the engine. Verify that the engine continues to run for at least 5s.
Learn key completed.
Start engine with the new key.
Done.
No comments:
Post a Comment