Autel IM608 Program Mini Cooper 2014 CAS3 Key by OBD

Here's the step-by-step key programming procedure for Mini Cooper 2014 Cas3 with Autel MaxiIM IM608.

 

 

Select IMMO->MINI->Auto Detect VIN-> Mini (Europe)->Smart Mode

 

IM608 will automatically scan the immobilizer system, engine system, transmission system

Press OK to continue

Select Key Learning function

Autel IM608 read vehicle and ecu information

This is a MINI R56 CAS3

Confirm information and press OK to continue

 

Going to generate dealer key
Add key and all keys lost are both available for current CAS
Key learning process requires network to obtain data. Enable WiFi connection.

Remove the key from the ignition switch. If it is a smart key, take the key out of the car.

Reading key information
Connect to internet to obtain data
Read key information success.
Backup original key data

Save key data

Press OK to continue
MaxiIM IM608 will key numbers and positions, select an available key position (i.e Key4) and press Programmer Generation Key

Choose key type, here Semi-smart key

Connect the IM608 to the XP400 programmer and put the new key into the XP400 programmer card slot

Writing key in process

Generate dealer key success
Insert the key into the ignition switch to start the car once.
If the vehicle cannot be started, or the ELV is displayed on the instrument, please synchronize the ELV or DME according to the situation

Program new smart key success.

Done.
www.obdii365.com