AUtel IM608 adds Mazda 2018 2019 and more Toyota using the APB112

Keeping you Autel MaxiIM tools (IM608 IM508) up to date? Check these recent updates! (2019-09-20)

Main Update:Mazda 2018-2019
Chrysler going back in time to cover older models like 2001 and up PT cruiser
More Toyota using the APB112 smart key simulator


Detail Update information:
IMMO Mazda
Add the password-free immobilizer function for Mazda models Mazda2(2018-2019), Mazda6
(2018-2019), CX-3(2018-2019), CX-5(2018-2019), CX-8(2018-2019), CX-9(2018-2019), MX-5(2018-2019).


IMMO_Chrysler
add the Operate Guide for all functions of all models.and select the Function Mode in 
System Selection, including
Chrysler 200 (2007-2017), 300 (2005-2019),300C(2005-2019),300M (1999-2007), Grand Voyager (2001-2019), Pacifica (2004-2008, 2017-2019), PT Cruiser (2001-2010), Platinum (Serbing)(2001-2014), Platinum (Serbing) CONV (2001-2014), Urban and Rural (Town & Country) (2001-2019) and etc

Add the Immo Status Scan function of models (for CAN protocol), including
200 (2001-2017),300 (2005-2019),300C(2005-2019),300M (2004-2007),Poplar (ASPEN)
(2007-2009), Grand Dragon (Grand Voyager) (2007-2009),Pacifica (2007-2008, 2017-2019)
PT Cruiser (PT CRUISER) (2005-2010), Platinum (Serbing)(2007-2014), Platinum (Serbing)CONV (2007-2014), Urban and Rural (Town & Country) (2007-2019)
Improved the basic functions of the 2018-2019 models
Improved the Relevant Information of PT Cruiser in 2001-2005

IMMO Toyota

Lexus:
Repair the problem that the Page 1 of the key is Type 98 of some vehicle models cannot add key by using the Autel APB112 simulator
Repair the Add Smart Key function of IS250 and other vehicle models.


Toyota:

Repair the problem that the Page 1 of the key is Type 98 of some vehicle models cannot add key by using the APB112
Repair the Reset Immobilizer Box function of Highlander and other vehicle models.


Scion:

Repair the problem that the Page 1 of the key is Type 98 of some vehicle models cannot add key by using the APB112

Autel IM608 adds BMW F10 CAS4 Smart Remote via OBD

Autel MaxiIM IM608 adds BMW CAS4/CAS4+ all series OBD programming  (add key & all keys lost) in June 2019.

Make sure your Autel IM608 has registered with XP400 programmer adapter.

Here’s a demo example on CAS4 via OBD thought Smart Mode

Model: BMW 528i 2015 F10 CAS4+

smart key chip: Hitag Pro 49
add new smart remote via OBD

Left: new key     Right: original key

Procedure:
Turn on ignition
Connect MaxiFlash JVCI to IM608 by USB to OBDII
Connect XP400 via USB port

In MaxiIM Im608, Select IMMO->BMW->Smart Mode

IM608 detects immobilizer system: CAS4/CAS4+

Show immobilizer box, DME and EGS

Try to delete all fault code by clear code operation

Delete fault code on CAS4 and DME

Select Key Learning->See all vehicle information/ecu information->Key Learning by OBD

Follow instruction below to operate
Read SK or load SK ->Write Key

Key number: position used key 1, 2, 4 to try to program free key3

Press OBD read SK
This process requires networking to obtain data, set up the network to ensure that it is connected to WIFI and keep this state during the whole process.
Reading information about current ECU…

This current software version is not supported need to upgrade first before read SK.

Execute upgrade with the Autel IM608 System Mode->CAS4/CAS4+ Immobilizer System->Programming Operation->ECU Upgrade

This process requires network connection as well.
Wait 7-8 minutes, Don’t touch any buttons of vehicle
Dashboard will normally be off and on

After 7-8 minutes ECU upgrade successfully

Go back to read SK by OBD

Read SK needs program, and make sure the voltage is over 13V and stable.
Require network connection to obtain data.
Download files

Download to programming file completed
Fine SK process time around 10 minutes
Dashboard will normally be off and on

Do you have working key? Yes

Put a working key to start coil as close as possible.

Now got SK password
Input secret key->select immo ECU type CAS4+

Fill all SK
Enter the secret successfully. Execute “Write Key” function
Choose key position 3 and Write new key

If key learning successful, but there is no remote control, add one more key, the remote control of the second key will work normally.

Put new key close to the Start coil. Ket frequency: 315Mhz

Key learning in process

Write key successful
Put the key close to start induction coil, press and hold the ignition for 10s, after the learning is completed, the key can be normally used.

Key number 3 already used.
Test remote and start engine.

Done.

see also:

BMW CAS4/CAS4+ by OBD with VVDI2, BMW Explorer, or Autel

Autel IM608 Program Polo 2015 MQB Key Success

Feedback:
Polo 2015 mqb done with Autel MaxiIM IM608.
The mqb key is not original but it goes very well. You can use original mqb key but they are very expensive.

Picture attached:

How to use Autel G Box for Benz All Keys Lost?

What is Autel G box:

source: http://www.obdii365.com/wholesale/autel-g-box-benz-bmw-adapter.html

It’s a new adapter to works for Auetl MaxiIM IM608 and IM508 with XP400 adapter (also works with Aurodiag IM600 and IM100)

The G-box features:

• Used for Mercedes all keys lost and password calculation (much faster)
• Used for Mercedes ECU data and EIS password calculation (much faster)
• Mercedes DAS3 can EIS/EZS all keys lost
• Save time to read W204 ECU data & W207 EIS by over 85%
• No need to remove and reinsert the key for W221 & W164 after 2009
• Help read and write BMW DME/DDE ISN in boot mode

When you need Autel G-box:

It’s required when you do all keys lost for Mercedes or BMW.

1. Mercedes all keys lost – faster password calculation

-8x times faster password calculation for EIS W172, W204, W207

-4x times faster password calculation for EIS W209, W211, etc.

2. Mercedes all keys lost – no more repeated insertions and removables of ir simulator

W164/-208, W251/-2008, W164/2009-, W169, W251/2009, W216, W221 (partial), W202 (K)/ W208 (K)/ W210 (K), W203 (K)/ W463 (K)

3. Mercedes all keys lost – can be programmed on the vehicle without removing the EIS

Except for EIS W164/-2008, W251/-2008, W221, W202 (K)/ W208(K)/ W210 (K), and W203 (K)/ W463 (K), all other eis can be programmed on the vehicle directly

4. Mercedes all keys lost, BMW DME/DDE ISN reading and writing in boot mode

23 categories of Bosch engine, including MEVD/EDC17

6 categories of Siemens/Continental engine, including MSD/MSV engine

How to use Autel G box:

You should know all the details (incl. ports and cables) before you use the G-box

There are two methods to use the G-box, OBDII or on table

method 1: OBDII operation when Mercedes lost all keys

the method is use for Mercedes W204, W207, W164, W216 EISs after year 2009

steps to connect to G-box:

1. connect the G-box to the car thru OBD port
2. remove the fuse of EIS on the vehicle

connect the relay ports to the fuse using the supplied fuse cable

3. when the vehicle has an ELV, connect the K7 port and ELV plug using the supplied K-line cable
4. connect the G-box to the Autel diagnostic tablet like MaxiIM IM608

method 2: operation on table when Mercedes lost all keys

the method is used for all Mercedes EIS that are already covered by Autel tablet

 http://www.obdii365.com/wholesale/autel-g-box-benz-bmw-adapter.html

Autel IM508 Program 2008 Jetta Megamos ID48 Key Success

Purpose: transponder key copy

Car model: VW Jetta

Car year: 2008

Transponder: Megamos ID48

Device: Autel MaxiIM IM508

Steps:

go to autel im508 immo system

accept the disclaimer

go to im508 volkswagen software

smart mode

reading vehicle information

read out the vehicle

it’s jetta 2008

information:

1. megamos 48 key; #key blank
2. “key learning” function will first start clear all working keys, then learn keys available.

“remote control learning” function will first clear all working remotes, then learn remotes available. before using these functions, pls ensure that all keys are prepared.

3. “key add” function will add one key to existing key count.

“remote control add” function will add one remote to existing remote count. the customer can use there functions without all keys available.

copy megamos 48 key:

step 1: read immo data

step 2: read and write key id

step 3: make a dealer key

key copying success!

test the key on the car

the key is working!

job’s done!

Time: under 5 min

Result: success!

Conclusion:

Walk thru of the great feature built into the Autel IM508 and IM608 for cloning VW megamos id48 transponder keys.

Using the Scan tool you can clone a key ID to a new blank key saving time from pulling and decoding the PIN.

Everything can be done in under 5 Minutes. Volkswagen Audi Group.

http://blog.obdii365.com/2019/08/18/2008-jetta-megamos-id48-copy-using-autel-im508/