Program Benz 2010 ML350 W164 Key with Autel IM608 via OBD

 How to use Autel MaxiIM IM608 Pro to add a spare key on Mercedes 2010 ML350 EIS type W164 via OBD without G box.

Go to IMMO- Mercedes Benz – Smart Selection – Add Key – On vehicle

Confirm vehicle information

Follow these steps to add a key

Read EIS data

Insert the ignition key into the IR key hole on the xp400 programmer
Read ignition key
Read blank key information

Insert the blank key (BE key with key shell) into the IR key hole on the xp400 pro programmer
Calculate password

follow these steps to calculate password

calculate password via OBD takes about 10-30 mins

read password success. Start to add key.
Generate key file
Write key file

Add key successfully with im608 pro
Insert new key into the EIS. If the red indicator lamp on the key lights up and goes off, key learning is successful.
Turn the ignition on and check if the vehicle can be started normally. If the vehicle is not started normally, the key addition failed.

Check if the remote lock and unlock functions can work normally, if not, check if the key battery can work normally.

Done.

IM608 Failed to Program Range Rover Vogue 08 PCF7941 Key?

 Many people had the same problem programming a spare key on this car- Range Rover Vogue 2008 PCF7941. They cannot program the key to this car with Autel MaxiIM IM608, Xtool, Zed full etc. Tried the same key sport/discovery it still failed.

Here’re tips on programming spare keys to this car.

Vogue 08 does not have CEM nor KVM module. Vouge has Lear leads box. It looks exactly the same as a BMW EWS. Under middle speaker or dash.

Anything with Hu92 is either EWS or Lear Leeds. Anything Hu101 is CEM.

Pull Lear module out and do it on bench. 

Read eeprom 8 leg. Go in XP400 or XP400 Pro programmer under Land rover Chip read and write. It will show you the wiring diagram.

Just make sure your transponder chip and frequency same as the original key.
on bench its doesn’t matter if you got the original key or not. It will work.

If adding via obd you need a dealer key.

If you haven’t got a dealer key then program from the immobilizer (LEAR) module. If you have a working key then you can clone the id46 chip.
You can use either remote with pcf7941 which will add the remote automatically or you can use BMW remote with separate id46 chip and manually add the remote as you would an EWS system BMW remote.  Transpoder clone with vvdi mini key tool (or any devices can clone id 46, handy baby, keydiy kd-x2, CN900mini etc ) remote programming by manual.
This just applies to the Range Rover Vogue. Range Rover Sport, Discovery 3 are completely different systems but most of people can’t seem to tell the difference.

Vogue is a BMW keyblade and immo different to sport which is a ford blade and different immo to vogue, one was built by bmw when owned other was when ford owned landrover
The Sport/Disco3 key is not compatible.

Original key should be pcf7936 but you can precode the pcf7941 into dealer key as said. Just pull the Lear box and crack on with it.

FYI: Easy with working key adapt to car with SKP900 or smart pro, londsor remote go in at same time.

Autel IM508 Adds 2018 Dodge RAM 3500 Key by 12+8 Cable

 Chrysler vehicles 2018- now require the 12+8 cable to clear DTCs and to add keys.  Here we successfully added a new key fob with Autel IM508 XP400 and autel 12+8 cable for Dodge RAM 3500 year 2018 with secure gateway module (SGM). Program key in auto mode.

4 buttons remote key fob

2018 Dodge RAM3500 SGM location:

Need to remove the stereo in order to get to the secure gateway module.  Remove everything and you will see.

Go to Dodge 3500 key programming menu, IM508 asks to hook up a Chrysler FCA 12+8 adapter

We’ve got that connected right there behind the stereo

Turn the ignition off and turn on the emergency flashers

Read security password
Select Keyless System (CAN) – Key Learning – Key Learning

Turn the ignition off and turn on the emergency flashers

Put smart be to be learned in vehicle and take other keys out of the vehicle
Auto fill-in 4-digit pin to access

Press LOCK or UNLOCK button on the remote control

Key learning successful
Put everything back
And test remote control and new key.

Done.

www.obdii365.com

http://blog.obdii365.com/2021/09/08/autel-im508-program-2018-dodge-ram-3500-key-fob/