Autel IM608 Read Motorola HC05E6 Remote Password

Purpose:

Mercedes Motorola Processor Key HC05E6-REMOTE (0F82B) Password Retrieval

You need:

Autel MaxiIM IM608

XP400 programmer

Motorola Processor Key

Steps:

Go to Autel Im608 programmer

Accept the agreement

Chip (eeprom, mcu, ecu) – Chip read & write

IMMO – BENZ – HC05E6-REMOTE (0F82B)

Read and save data

Go to EEPROM for Schematic Diagram

Then read HC05E6 remote

Autel IM608 managed to read chip

Save chip data

Exit

Go to EdHex

Select file that saved just now and check password

The security password of the remote key should be: 7c cf 6a ce 9a ab d9 82

Job’s done!

www.obdii365.com

http://blog.obdii365.com/2020/01/13/mercedes-motorola-hc05e6-remote-password-retrieval-with-autel-im608/

Program Audi A6 2011 All Keys Lost with Auro OtoSys IM600

Car model: Audi A6 3.0 TDI 2011
Key type: 8E chip transponder
Purpose: program dealer key when all keys lost
Method: on the bench
Devices used:
8E transponder and key blank
Auro OtoSys IM600/ Autel MaxiIM IM608 key programmer

Major progress:
1.Read EZS
2.Load EZS
3.Make dealer key
4.Learn key

Procedure:
1.Read IMMO data from EZS

Connect UP400 eeprom programmer with EZS follow the wiring diagram (you can check the wiring in IM600/IM608 menu)
Select Read EZS data by dump (All key lost)-> Read data by dump

Reading EZS dump in process, the green indicator on up400 programmer will turn on

Read EEPROM from EZS success. Save data

Save data success. Display vehicle information, PIN, CS, key number etc

2. Load EZS Data
set up bench connection

Select EZS-Kessy AUDI A6/Q7->Load EZS data

Load data saved in step 1 and confirm vehicle information

3.Make dealer key
Select Make dealer key

Put a blank key or chip into Autel IM608 xp400/ IM600 up400 programmer keyhole and press OK to continue

Communication
Make dealer key success

4. Learn key
Select Learn key

Remove key chip form keyhole
Insert chip into key blank and turn on ignition
Select number of keys need to learn

Turn ignition OFF
Insert the sequence keys that need to be learned and turn ignition switch to CRANK.
For each key, wait for the steering column lock status to become unlocked is need.

Key learning completed.
Done.
www.obdii365.com

Related Post:
Program Audi A3 2012 All Keys Lost with Auro OtoSys IM100
Auro OtoSys IM600 Program Audi Q5 2015 All Keys Lost

Auro IM600 Autel IM608 Adds 500 EEPROM and MCU Chips

Auro OtoSys IM600/ Autel MaxiIM IM608 released BIG update for IMMO! 500 EEPROM Chips added and 500 MCU chips added!

V2.01  4/22/2019
IMM0_lmmo Progrann  Version number V2.  Release date 2019/04/22 

Chip:
1.    Added functions including reading and writing of more than 500 EEPROM  chips including the following chip manufacturers: AKM, AOESTO, ALTERA. AMIC, ONSEMI, CHINGIS/PMC, EON, ESMT, EXEL, NSC/RAMTRON, FORD, FUJITSU, GI, GIGADEVICE, GRUNDIG, HOLTEK, ITT, KHIC,  MACRONIX,MICRON, MITSUBISHI, NUMONYX,PCT, PHILIPS, PIONEER, SAMSUNG,  SST,ST,WINBOND, XUSSR, and YMC；
2.    Added functions including reading and writing of more than 500 MCU chips, including the following chip manufacturers: ATEML,FUJITSU,  MICROCHIP,NSC, SAMSUNG, and SILABS, TI;
3.   Made the immobiiizer chip function independent of menu IMMO,  supported the reading and writing functions of more than 100 ECU chips.
Supported the following chip manufacturers: AUDI,BENZ,BMW, BUICK, CHEVROLET, CHRYSLER, DELPHI, GM,HYUNDAI, JAGUAR, LANDROVER, NISSAN, PORSCHE,  STEC. and VOLVO;

Key:
1. Added 8 new supported keys, including Hitag2 Extended, Hitag3, PCF7930, PCF7931, PCF7935, TEMIC11, TEMIC12, and TEMIC8C;
2.   Added 46 Fiat key, supported generate, unlock, and finding the seventh byte;
3.   Added check and lock function of Hitag Pro; added key model generation function for Hitag Pro Porsche;
4.   Added unlock function for MEGAMOS 8E;
5.  Added check and lock for MEGAMOS AES; added generation and certification  functions for Audi, Skoda, SEAT.

IMMO international models Version number V2.50 Release date 2019/04/22
1.    Added the immobilizer system of Mahindra model as follow.
Blade Key system type:
Scorpio,Bolero,Xylo,XUV600,Genio,Quanto,TUV300.lmperio,KUV100, NuvoSport, Thar,BMT,Bolero PlK-UP,Marazzo,XUV300
Sman Key system type : XUV500,XUV300
2.    Added the Smart Mode of Mahindra model.
3.    Added the immobilizer system of PSA model as follow:
Blade Key system type : Peugeot 107,Peugeot lon, Peugeot Boxer3, Citroen C1 etc

http://www.obdii365.com

Auro OtoSys IM600 Adds VW Polo 2016 MQB Key success

Test report:

Auro OtoSys IM600 (Autel MaxiIM IM608) add with success on POLO 2016 a MQB48. 5 minutes job.

Add key ok, no possible to make all keys lost. 

Auro IM600 Autel IM608 adds Fiat IMMO Models

Good news!!! Auro OtoSys IM600 and Autel MaxiIM IM608 adds Fiat pre-code beta testing software version on April 12th, 2019.

IMMO Fiat V2.48.13 12/04/2019
1. Add backup immo data and make dealer key function for Doblo(2000-2009), Stilo(2000-), Linea(2007-), Bravo(-2014), Ducato(2007-2012).
2. Add key programming for Punto, Ritmo(198), Scudo, 124 Spyder, Croma, Idea, PROMASTER CITY, PROMASTER VAN, Panda, Qubo, Sedici, Seicento, Fiorino, Palio, Siena, Strada, Uno, Uno VDO, Doblo
Does that include precode for key added?
Yes, some.

http://www.obdii365.com/wholesale/autel-maxiim-im608-diagnostic-programming-tool.html

How to print data on Auro IM600/ Autel IM608?

Q: Anyone know how to setup printer on Auro OtoSys IM600/ Autel MaxiIM IM608?

A: Same process as Autel MaxiSys series scanners. Check step-by-step instructions below.

How to enable IM600/IM608 wireless printing?

Autel scan tools cannot sent files directly to a wireless printer.

Instead, you need to install PC Suite software onto a computer which the scan tool will use as a gateway to print.

Install the Maxi PC Suite from the Autel

Download thew new Maxi PC Suite from Autel official website

Autel Printer App system requirement:

• A computer connected to the same network (wired or wireless) as the Autel unit
• Win7 Extractor or WinRAR (The Autel file is downloaded in a .ZIP format and must be extracted)
• A restart is required after installation

The drivers for the Autel j2534 and PC Link for wireless printing are included in the Maxi PC suite.

Go to Supports & Updates->Firmware & Download-> Update Client-> Download Here

Remove Maxi PC Suite is it is currently installed.
Skip this step if you have latest Maxi PC Suite installed

Install the new Maxi PC Suite software

Make sure the latest Adobe Acrobat Reader is installed

Add exceptions to anti virus

Allow PC Link Program on Windows Firewall

Open PC Link from Maxi PC Suite

Make sure the PC Link is running in the background process

Open MaxiSys Printer

(Verify the Maxi PC suite is running? The easiest way to check the system tray at the bottom right on the task bar for the Maxisys Printer Icon.)

Disable Auto Print

Perform a test print from the Autel IM608

After tapping the print option, you should see the “Creating print file” dialog box.

You may be asked to select a “Printer”, which is simply the name of the computer, if there is more than one computer running the PC Link software. Tap to select a computer destination which will be indicated by the blue check mark. Then press, “OK”

The “Upload file to the printer” dialog box should appear for several seconds, and will disappear when the file is transfer to the computer.

Print confirmed

You should now be able to print any single page or entire report from your Autel diagnostic tools by selecting the print icon in the top right of the Maxi PC Suite pages.

BTW,  Autel IM608 is compatible with add-on functions oscilloscope, digital videoscope and digital Inspection Camera as MaxiSys series.