Autel Update Opel PSA 4A PIN Reading and Key Programming

Autel continues to strengthen its leadership position in key programming and IMMO solutions by adding new PIN reading support for smart 4A keys on PSA and Opel vehicles.

This update represents a new step in MaxiIM’s expansion, adding support for Add Key and All Keys Lost across a wide range of modern Peugeot, Citroën and Opel models.

 

Highlights of the update:

• Support reading PIN for 4A smart keys
• Add Key support
• All Keys Lost Support
• Wide coverage of Peugeot and Citroën models from 2018 to 2026
• Coverage for Opel models from 2020 to 2025
• Support IM508S and IM608 II devices
• Compatibility with APB112 Smart Key Simulator and Autel Universal Keys

As modern vehicle security systems continue to evolve, comprehensive coverage and ongoing updates have become an essential factor to enable key and vehicle security professionals to service more vehicles and maximize the return on their tech investment.
This update is free during your membership in #Otel products. In case you do not have a membership or one of our supported devices, please renew your annual subscription or buy one of the devices.

PSA Coverage 

PEUGEOT:

SUPPORTS KEY ADDING AND PASSWORD-FREE KEY LEARNING (ALL KEYS LOST) FOR 4A SMART KEY TYPE FOR THE FOLLOWING MODELS OF 2018-2026:
208, 301, 308, 308S, 408, 408X, 508, 508L, 2008, 3008, 4008, 5008, Eert, Partner, Rifter, Tara, Traveller, e-208, e-308, e-2008, e-3008, e-Expert, e-Partner, e-Rifter, e-Traveller.

CITROËN:

SUPPORTS KEY ADDING AND PASSWORD-FREE KEY LEARNING (ALL KEYS LOST) FOR 4A SMART KEY TYPE FOR THE FOLLOWING MODELS OF 2018-2026:
Basalt, Berlingo, C3, C3 Aircross, C3 Picasso, C4, C4 L, C4X, C4 Aircross, C4 Cactus, C4 Picasso, C5, C5X, C5 Aircross, C6, Dispatch, DS 3, DS 4, DS 4, DS 6, DS 6, DS 7, DS 8, DS 9, e-Berlingo, e-C3, e-C4, e-Dispatch, e-Jumpy, Jumpy, e-SpaceTourer, Proace, Proace Electric, Proace City, Proace City Electric, SpaceTourer.

Note: Used with XP400/XP400 Pro/XP1 Pro + Autel universal key + APB112 smart key emulator.

Opel Coverage:

OPEL:

SUPPORTS KEY ADDING AND PASSWORD-FREE KEY LEARNING (ALL KEYS LOST) FOR 4A SMART KEY TYPE FOR THE FOLLOWING MODELS OF 2020-2025:
Combo Cargo, Combo Life, Corsa F, Astra L, Crossland, CrosslandX, Grandland, Grandland X, Frontera, Mokka B, Movano, Vivaro C, Zafira Vivaro Life.

Note: Used with XP400/XP400 Pro/XP1 Pro + Autel universal key + APB112 smart key emulator

Autel IM608 II Update Benz FBS4 VGS4 TCU Cloning

 

Autel MaxiIM IM508S and IM608 II released a big immo software update for Benz, BMW and VAG models- update lots of ECU and TCU cloning models.

Requires Gbox3.

Mercedes Benz (New Feature)
The following ECU cloning function covers models from 2000 to 2019

Supports cloning (Bench mode) for the following 27 ECMs from 4 suppliers for Mercedes Benz:

BOSCH:
CRR2, EDC16C2, EDC16C32, EDC16CP31, EDC16CP36, EDC17C43, EDC17C66, EDC17CP01, EDC17CP10, EDC17CP46(CR60), EDC17CP57_V1(CR43), EDC17CP57_V2(CR61), ME17.7, ME17.7.8, MED17.7.1, MED17.7.2, MED17.7.3, MED17.7.3.1, MED17.7.5, MED17.7.7,MRD1;

CONTINENTAL:
SID307(CRR1), SID310(CRR1 plus), SIM271DE;

DELPHI:
CRD11, CRD3x.x;

SIEMENS:
SIM271KE

Supports cloning for the following 8 TCUs for Benz:
FSB4 VGS4-0-NAG2 cloning via Bench mode;
FSB4 VGS4-500-NAG2 cloning via Boot mode;
VGS-NAG3, VGS2-FDCT, VGS-FCVT, VGS-FDCT, EGS52, VGS3-FDCT cloning via Bench mode

BMW
The following ECU cloning function covers E/F/G chassis-equipped models up to 2019
Supports cloning (Bench mode) for the following 42 ECMs from 2 suppliers for BMW:
BOSCH:
EDC16C1, EDC16C31, EDC16C35, EDC16CP35, EDC17C06, EDC17C41, EDC17C50, EDC17C56, EDC17C76, EDC17CP02, EDC17CP09, EDC17CP45, EDC17CP49, MD1CP002, MD1CP032, MD1CS001, ME17.2.1, ME17.2.42, MED17.2, MEV17.2, MEV17.2.1, MEVD17.2, MEVD17.2.3, MEVD17.2.4, MEVD17.2.5, MEVD17.2.6, MEVD17.2.8, MEVD17.2.9, MEVD17.2.G, MEVD17.2.H, MEVD17.2.K, MEVD17.2.P, MEVD17.8.4, MG1CS003, MG1CS024, MG1CS201;
SIEMENS/CONTINENTAL:
MSD80, MSD81, MSD85, MSD87, MSV80, MSV90

Supports cloning (Bench mode) for the following 6 TCUs from 2 suppliers for BMW:
GETRAG:
F-6HP,F-7DCT300,F-DKG 436 Gen2;
TCM ZF:
F-8HP,F-8HP Gen3,G-8HP

Volkswagen
The following ECU cloning function covers models from 2000 to 2024
Supports cloning (Bench mode) for the following 62 ECMs from 3 suppliers for VAG:
BOSCH:
EDC16C4, EDC16CP, EDC16CP34, EDC16CP34 CRAFTER, EDC16CP34 M&S, EDC16U1, EDC16U31, EDC16U34, EDC17C46, EDC17C54, EDC17C64, EDC17C74, EDC17CP04, EDC17CP14, EDC17CP20, EDC17CP20_CRAFTER, EDC17CP24, EDC17CP44, EDC17CP54, EDC17CP74, EDC17U01, EDC17U05, ME17.1.1, ME17.1.6, ME17.5.20, ME17.5.22, ME17.5.24, ME17.5.26, ME17.5.6, MED17.1, MED17.1.1, MED17.1.10, MED17.1.12, MED17.1.21, MED17.1.27, MED17.1.6, MED17.1.61, MED17.1.62, MED17.5, MED17.5.1, MED17.5.2, MED17.5.20, MED17.5.21, MED17.5.25, MED17.5.5, MED9.1, MED9.1.1, MED9.1.2, MED9.1.5, MED9.5, MED9.5.10;
CONTINENTAL:
Simos 12.1, Simos 12.2,Simos 8.3x, Simos 8.4x, Simos 8.5x, Simos 8.6x;
SIEMENS:
PCR2.1, Simos 6.2, Simos 6.3, Simos 7.1, Simos 7.1A

Supports cloning (Bench mode) for the following 6 TCUs from 3 suppliers for Volkswagen:
BOSCH:
DQ380;
CONTINENTAL:
DQ400, DQ500;
TEMIC:
DQ200_G2_PQ, DQ200D, DQ250_MQB

Program Kia SELTOS 2021 8A All Keys Lost by Autel IM608 II

 Tutorial: How to program 2021 Kia SELTOS 2021 All Keys Lost using Autel IM608 II programmer.

 

Transponder – ID
8A Texas Crypto 128-bits AES

In IM608 II, go to System selection- Read pin code- Read pin code (8A smart card)

Turn on the hazard warning light.
Turn the ignition off.
Open and then close the driver door once.
Reading password
Read password successfully.

Go back to Manual selection
Select Korea-SELTOS-2020 up- Blade key

Select Hot Function- Key Learning

Follow 3 steps to learn key
Step 1: Function initialisation
Step 2: PIN verification
Step 3: Key Learning

Key Back to Min menu, select Control Unit-Remote System- Remote control learning

Program remote control successfully.

Test the new key.

Autel IM608 II Update 2025 Toyota RAV4, Tacoma, Land Cruiser, Prius

 Autel MaxiIM IM508S/IM608 II as well as KM100 released new Toyota and Lexus Immobilizer software on Dec. 30th, 2024. IM508 and IM608 will receive the same update later.

 

Toyota IMMO
Upgrades coverage of model year for the following models, supporting models up to 2025:
Camry HV, Grand Highlander (fuel/hybrid), RAV4, Tacoma, Land Cruiser, Prius etc
Optimizes VIN decoding function.

Lexus IMMO
Upgrades coverage of model year for the following models, supporting models up to 2025:
LC series, LS series, TX series, GX series, RZ series etc.
Optimizes VIN decoding function.

 

 

All keys lost function were removed from North American devices.

For other regions, if 2025 Toyota/Lexus model has the same system as 2024/2023 model, Autel can do all keys lost as well.

Autel IM608 Toyota “New Key Registered” Solution

 Problem:

Programmed a smart key into a 2023 Toyota Yaris Cross using Autel IM608 II, and it works fine but when you get in the car to start it, it says “new key registered, contact dealer”. But it works fine and is registered correctly in the system. How I can delete it?

The error happens on new Toyotas often.  This is normal on all new Toyota.

Drive it for a while/a couple of days/weeks, it will go away!!!

It’s part of the Toyota security and the key needs to be linked with Toyota.

 

That’s some of the new features in Toyota to let the owner know that there is a new key programmed to the car in case you did not approve a new key and someone made a copy while you were not there. If all works fine and there is no codes it should go away in a few start cycles.

 

 

www.obdii365.com

Autel IM608 II Unlock Renault Clio V Gateway Error Code 17?

 Problem:

Tried to program smart key for Renault Clio V 2020 with Autel IM608 II Pro. I purchased 2 tokens in the device. But still failed to unlock security gateway.

“Lock failed.

Error message: Response failed. Unable to obtain the key to unlock the gateway. Please contact customer service.

code=17 ”

Same as IM508S.

Here is the clue.

Due to some technical reasons, the Renault safety gateway unlock feature will no longer be supported from the Autel MaxiIM series.
If customers need to unlock the safety gateway, they can try alternative solutions, such as use Renault gateway bypass adapter or using the diagnostic function to unlock the gateway first, then proceed with the IM functionality.

The Renault gateway unlock token is only used to unlock security gateway to perform diagnostic functions (active test, special functions).

For Immobilizer functions, you need to hook up the Renault gateway adapter.

For 2019- Renault Clio V/Captur II, you can also remove HFM to read pin from dump using APB131 adapter.
Renault menu: IMMO-Renault-Clio v-Key Learning, unit programming, choose remote learning.

How to Solve Autel IM608 II “Update GBOX Error”?

 Problem:

When I was using Autel IM608 II to program BMW and trying to update the G-BOX3, it failed and prompted:

“Update GBOX error! Press OK to retry. Otherwise, press Cancel.”

Here’s the error page, any ideas?

Solution

1. Power off and power on the Autel G-BOX3 again, reconnect the cables & engine module for reading more times. Try a few more times.

2. If the step1 does not work, please upload the data log for help.

Autel IM608 II Read BMW MEVD17.2.1 DME ISN with Gbox

 How to Read BMW ISN code from MEVD17.2.1 ECU using Autel IM608 II Pro and Gbox3.

Select System selection->Engine->Direct mode->Quick Entrance

Input Bosch part number to detect ECU type.

It is MEV17.2.1 DME.

Press Bench to continue.

Select TC1796 MEV17.2.1

IM608 II will show you instruction and wiring diagram.

Connect ECU with Gbox3 following the wiring diagram

Select Read ISN

Follow prompts to read ISN.

Read ISN successfully.