Sunday, December 25, 2022

Autel IM608 Adds Toyota RAV4 2022 Key by OBD

 Information Only. Here we share a customer’s working experience on a 2022 Toyota Rav4 USA model.

 

2022 Toyota Rav 4, USA, Add Smart key. He has a working key to start the vehicle. The new key was a brand new OEM smart key.

 

First try the UHS Toyota bypass cable, by connecting G box right into the smart box. But did not get any communication.

Second attempt: He then notice that the Autel IM608 had an update for Toyota dated Dec 19th 2022. He performed the updates noticed that after the update it said Back Up IMMO date via OBD, or VIA G-box , he tried G box again and No luck, keep saying no communication to check cable turn off Bluetooth check power etc.


Autel IM608 Adds Toyota RAV4 2022 Key by OBD 1

Third attempt: Pulled out the IM508 /KM100 so it will have a straight connection, still no luck

Last try: So he put it all back together and then decided to try to back up IMMO via OBD. G box Was not needed. Connect right into OBD 2 port. It did back up the data, So went into key learning, follow the steps, it asked if back up, clicked yes, and it went into learning mode. And successfully learn a New key via OBD II without doing a In-code or out-code, or any Password, or paying any $30 fee. (You would typically need a in-code & out-code password, just to add a key fob, and would need to pay $30 for the third party service. But this time does not need.)

The new update says in the update that it supports up to 2017. But still worth trying.

Autel IM608 Adds Toyota RAV4 2022 Key by OBD 2

Autel IM608 Adds Toyota RAV4 2022 Key by OBD 3

Autel IM608 Adds Toyota RAV4 2022 Key by OBD 4

Monday, December 12, 2022

How to Connect Mercedes TCM with Autel IM608?

 Problem:

I want to swap mercedes w204 tcm (mercedes w204 is the C class series from 2008 till 2014). The Autel IM608 shows only this drawing. My question is, does this connect to the gbox or the j2534 or same, or both?
I tried connecting the cables from the tcm to the gbox, powered it by the 12 V adapter, and then the gbox to the J2534, and the j2534 through the cable to the tablet.
In fact I didn’t have Resistors at that time other than the ones came with the gbox (900 ohms).
Another thing, the yellow cable as per the drawing is CAN-L, but as per the tag on the cable and the Gbox it is CAN-H (the green is CAN-L as well). So need to know which one to connect to PIN-2 on the transmission (CAN-H or CAN-L). Anyway, I used both ways, once the yellow one then swaped with the green.
As a result, I was not able to communicate with the tcm. Anyone can suggest what was the problem? Is it only that I don’t have the proper resistor? Or the connections? Etc…
Another thing, I need correction if my understanding of the process is wrong. The steps will be:
1. Read old tcm, on bench
2. Virginize the donor tcm, on bench
3. Write data to donor tcm, on bench
4. Write vin to donor tcm, on bench or on car?
5. Coding of the new tcm to the ezs, on vehicle

Connect Mercedes TCM with Autel IM608 1

Connect Mercedes TCM with Autel IM608 2


Solution:

Don’t need gbox2. It is the description and meaning of the wires that matters not wire colors!!! And you need that 120R resistor. This procedure is as simple as that wiring diagram.

Job very easy, people make it so hard,use direct connection to tcm from obd,120ohm required then you are ready to go.

the wiring diagram is correct in autel.

Follow wiring diagram below

Connect Mercedes TCM with Autel IM608 3

Connect Mercedes TCM with Autel IM608 4

Connect Mercedes TCM with Autel IM608 5

Connect Mercedes TCM with Autel IM608 6

Or do it this way.

Did not use gbox. I used vci hooked with usb, godiag bench connecter connected with 12v with 120ohm switch. Hook can hi, can low, power and ground.

godiag bench connector has everything you need. The godiag also has the correct round pins for easy attachment the Tcu connector.

Sunday, December 11, 2022

Autel IM508 IM608 Adds GM 2022 CAN FD IMMO

 Autel released Immobilizer software in October and September 2022. 

The upgrade can be applied to MaxilM IM508MaxilM IM608MaxilM IM608 PRO, OtoSys IM600.


VW (Version: V5.60)

1. Adds Read IMMO Data function for IMMO4 JCI NEC*95320 (Johnson Controls) instrument clusters including 6R0920861M, supporting models including Polo (2010-2014). 

2. Adds Read IMMO Data via OBD function for DCM3.7 ECM. 

3. Adds Read IMMO Data in Bench Mode function for ME17.5.24 and EDC17U05 ECMs. 

4. Adds data read & write (bench mode) function for DQ380 and DQ500 transmissions. 

5. Adds Auto Detect function for MQB instrument duster.


Audi (Version: V5.60)

 1. Adds Read IMMO Data via OBD function for DCM3.7 ECM. 

2. Adds Read IMMO Data in Bench Mode function for ME17.5.24 and EDC17U05 ECMs. 

3. Adds data read & write (bench mode) function for DQ380 and DQ500 transmissions. 


Seat (Version: V5.60)

 1. Adds Read IMMO Data (unction for IMMO 4 VDO NEC*24C32 instrument clusters including 6J0920900K, supporting models including Ibiza (2009-2021). 

2. Adds Read IMMO Data via OBD function for DCM3.7 ECM. 

3. Adds Read IMMO Data in Bench Mode function for ME 17.5.24 and EDC17U05 ECMs. 

4. Adds data read & write (bench mode) function for DQ380 and DQ500 transmissions. 

5. Adds Auto Detect function for MQB instrument cluster. 


Skoda (Version: V5.60)

1. Adds Read IMMO Data via OBD function for DCM3.7 ECM. 

2. Adds Read IMMO Data in Bench Mode function for ME17.5.24 and EDC17U05 ECMs. 

3. Adds data read & write (bench mode) function for DQ380 and DQ500 transmissions. 4. Adds Auto Detect function for MQB instrument cluster. 


Bentley (Version: V5.60)

 Adds data read & write (bench mode) function for DQ380 and DQ500 transmissions.


Chevrolet (Version: V3.70)

 1. Adds IM MO function for the following models: 

Chevrolet (US): Bolt EV (2022) with smart key, Bolt EUV (2022) with smart key, rvew Corvette (2021-2022) with smart key (CANFD), Silverado (2021-2022} with smart key (CANFD), Suburban (2021-20221 with smart key (CANFD), Tahoe (2020) with smart key, and Tahoe (2021-2022) wrth smart key (CANFD). 

2. Adds coverage for the following models: Chevrolet (US): Blazer (2022) with smart key,Camaro (2022) with smart key, Colorado (2022) with blade key, Equinox (2022) with smirt key. Express (2022) with blade key, Malibu (2022) with smart key, Silver>do 1500 (2022) with blade/smart key, Silverado 2500 (2022) with blade key (L83/LC8 engine). Silverado 3500 (2022) with blade/smart key. Spark (2022) with blade/smart key, Trailblazer (2022) with blade/smart key. Traverse (2022) with smart key, and Trax (2022) with smart key. 3. Adds Read PIN function for the following models: Chevrolet (South America): Agile (2009-2015} with blade key, Montana (2005) with blade key (9BGXH/9BGCS), and Montana (2006<2011) with blade key. Chevrolet (Africa): Utility (201S-) with blade key.


GM (Version: V3.70)

1. Adds IMMO function for the following models: 

Chevrolet (US): 

Bolt EV (2022) with smart key, 

Bolt EUV (2022) with smart key, 

new Corvette (2021*2022) with smart key (CANFD). 

Silverado (2021-2022) with smart key (CANFD). 

Suburban (2021*2022) with smart key (CANFD). 

Tahoe (2020) with smart key. and Tahoe (2021*2022| with smart key (CANFD). 

Buick (US): 

Encore GX (2020-2022) with smart key. 

Cadillac (US): 

Escalade (2021.2022) with smart key (CANFD). 

GMC: Hummer EV (2022) with smart key (CANFD), 

Savana (2022) with blade key, 

Sierra (2021) with smart key (CANFD), 

Sierra (2022) with smart key, 

Yukon {2021*2022) with smart key (CANFD). 

and Yukon XL (2022) with smart key (CANFD). 


2. Adds coverage for the following models: 

Chevrolet (US): 

Blazer (2022) with smart key, 

Camaro (2022) with smart key, 

Colorado (2022) with blade key. 

Equinox (2022) with smart key. 

Express (2022) with blade key, 

Malibu (2022) with smart key. 

Silverado 1500 (2022) with blade/smart key, 

Silverado 2500 (2022) with blade key (L83/LC8 engine), 

Silverado 3500 (2022) with blade/smart key, 

Spark (2022) with blade/smart key. 

Trailblazer (2022) with blade/smart key. 

Traverse (2022) with smart key, 

and Trax (2022) with smart key. 


Buick (US): 

Enclave (2022) with smart key, 

Encore (2022) with blade/smart key, 

and Envision (2022) with smart key (CANFD). 


Cadillac (US): 

CT4 (2022) with smart key (CANFD), 

CT5 (2022) with smart key (CANFD), 

XT4 (2022) with smart key, 

XT5 (2022) with smart key. 

and XT6 (2022) with smart key.

 GMC: 

Acadia (2022) with smart key. 

Canyon (2022) with smart/blade key (LCV_LFX), 

and Terrain (2022) with smart key. 

3. Adds Read PIN function for the following models: 

Satum: Astra (2008-2009) with blade key. 

Chevrolet (South America): 

Agile (2009-2015) with blade key, 

Montana (2005) with blade key (9BGXH/9BGCS), 

and Montana (2006-2011) with blade key. 

Chevrolet (Africa): 

Utility (2015*) with blade key.  

Thursday, December 8, 2022

Autel IM508 Program SantaFe 2019-2022 Smart Key

 Tutorial: Hyundai SantaFe 2019-2022 KeylessGo Smart Key programming with Autel IM608/IM508/OtoFix IM1.

 

Go to Immobilizer->Hyundai->Manual selection->Europe-> SantaFe(TM)->2019 onwards->Smart Key

Autel IM508 Program SantaFe 2019-2022 Smart Key  1

Autel IM508 Program SantaFe 2019-2022 Smart Key  2

Autel IM508 Program SantaFe 2019-2022 Smart Key  3

Autel IM508 Program SantaFe 2019-2022 Smart Key 4

Confirm vehicle information
Go to Control Unit->Keyless System->Remote Control Learning->Smart key learning

Autel IM508 Program SantaFe 2019-2022 Smart Key 5

Autel IM508 Program SantaFe 2019-2022 Smart Key 6

Autel IM508 Program SantaFe 2019-2022 Smart Key 7

Autel IM508 Program SantaFe 2019-2022 Smart Key 8

This function supports add key and all keys lost. Performing this delete all keys.
Turn the ignition off. Open and close the driver door once

Autel IM508 Program SantaFe 2019-2022 Smart Key 9

Input pin code and verify

Autel IM508 Program SantaFe 2019-2022 Smart Key 10

Within 5s after OK is pressed, use the back or top of the smart key to hold down the START button for 5s until the anti-theft lamps flash.

Program succeeded

Autel IM508 Program SantaFe 2019-2022 Smart Key 11

Autel IM508 Program SantaFe 2019-2022 Smart Key 12
Repeat to learn 2nd key.
Within 5s after OK is pressed, use the back or top of the smart key to hold down the START button for 5s until the anti-theft lamps flash.
Program succeeded.

Autel IM508 Program SantaFe 2019-2022 Smart Key 13

 http://www.key-programmer.org/2022/12/09/program-santafe-2019-2022-smart-key-with-autel-im508-im608/

Wednesday, November 23, 2022

Autel IM608 II vs IM608 vs IM508S vs IM508

 Autel is rolling new generation MaxiIM key programmers, IM608 II, IM608S II, IM608 Pro II and IM508S.

What’s the difference between MaxiIM 1st and 2nd generation?

 

Check table comparison below:

Table 1: Hardware Parameter 

ProductIM608ProⅡ/IM608SⅡ/IM608ⅡIM608PRO/IM600/IM608IM508SIM508IM1KM100
Hardware1, Tablet, Programmer, VCI1, Tablet, Programmer, VCI1, Tablet, Programmer, VCI1, Tablet, Programmer, VCI1, Tablet, Programmer, VCI1. vertical screen
2. VCI Bluetooth connection2. VCI Bluetooth connection2、VCI cable connection2、VCI cable connection2. VCI Bluetooth connection2. VCI Bluetooth connection
3. Unable to connect Programmer
Usability1.Support Auto VIN1.Support Auto VIN1.Support Auto VIN1.Support Auto VIN1.Support Auto VIN1.Support Auto VIN
2.Support Guided function2.Support Guided function2.Support Guided function2.Support Guided function2.Support Guided function2.Support Guided function
3. Support Immo scan3. Support Immo scan3. Support Immo scan3. Support Immo scan3. Support Immo scan3. Support Immo scan
Immobilizer softwarecomprehensive immo softwarecomprehensive immo softwarecomprehensive immo softwarecomprehensive immo software1. comprehensive immo softwareMost immo key programming function
2. some advanced feature need to payexcept remove and replace anti-theft parts
Diagnostic software1. Medium diagnostic function1. Medium diagnostic functionBasic diagnostic functionBasic diagnostic functionBasic diagnostic functionNo
2. BMW Benz immobilizer system programming2. BMW Benz immobilizer system programming
Remote ExpertYes (coming soon)NoNoNoYesNo
HardwareProcessorQualcomm SDM660 Octa-core Processor:Samsung Exynos T5260 6-Core Processor:Rockchip RK3566 Quad core Processor:Rockchip RK3188 Quad core Processor:Rockchip PX30 Quad-core Processor:PX30 4x ARM Cortex-A35
4x 2.2 GHz(A73)4x 1.3 GHz(A7)4x 1.8GHz(A55)4x 1.6GHz(A9)4x 1.5GHz(A35) 1.5GHz 64bits
4x 1.8 GHz(A53)2x 1.7 GHz(A15)
Operating systemAndroid 10.0Android™ 4.4.2, KitKatAndroid 11Android 4.4.4Android 9Android 9.0
RAM4 GB2 GB4 GB1 GB2 GB2G RAM
ROM128 GB64 GB64 GB32 GB(2021+ 64GB)64 GB64G Flash
Display/Resolution10.1 inches10.1 inches7 inches7 inches7 inches5.5′
Resolution1920*12001920*12001024*6001024*600800*12001280×700
Wi-FiWi-Fi (802.11 a/b/g/n/ac)Wi-Fi (802.11 a/b/g/n/ac)Wi-Fi(802.11a/b/g/n/ac)Wi-Fi (802.11 b/g/n)Wi-Fi (802.11 b/g/n)Yes
BTBT V5.0 + BR/EDRBT V2.1 + EDRNoNoBT V5.0 + EDRYes
USBUSB 2.0:(2 USB HOST Type A, 1 USB mini device)USB 2.0:(2 USB HOST Type A, 1 USB mini device)USB 2.0:(1 USB HOST Type A, 1 USB mini device)USB 2.0:(1 USB HOST Type A, 1 USB mini device)USB 2.0:(1 USB HOST Type C, 1 USB OTG Tyep C)/
HDMIHDMI 2.0HDMI 1.4aNoNoNo/
SD CardSD Card (Support up to 64GB)SD Card (Support up to 32GB)SD Card (Support up to 64GB)SD Card (Support up to 32GB)SD Card(Support up to 64GB)/
DB16 DLCNoNoDB16 DLCNoNo/
Headphone plugYesYesNoNoNo/
microphone1MIC1MICNoNoYes/
Speaker22NoNo1/
GPSYesNoNoNoNo/
Light-sensitiveYesYesNoNoYes/
Button1 power button1 power button1 power button1 power button1 power button/
Battery3.8V 15000 mAh3.8V 15000 mAh3.7V 5000 mAh3.7V 5000 mAh5800mAh4950mAh
CameraRear:  16 Megapixel, AF with FlashlightRear: 8.0 Megapixel, AF with FlashlightNoNoRear: 800W/
VCI or NotJVCI+JVCIstandalonestandaloneV1
ProgrammerXP400PROXP400PROXP200XP200XP1V200
VCI ConnectionBT/USBBT/USBstandalonestandaloneBT/USBBT
Weight1.58 kg1.48 kg0.78 kg0.78 kg0.46 kg/

Table 2: Function Comparison

Programmer function
with XP401 Pro/XP400 Pro
EEPROM read and writeAdvantage: More coverage than competitorsAdvantage: More coverage than competitorsAdvantage: More coverage than competitorsAdvantage: More coverage than competitorsAdvantage: More coverage than competitorsNo
Disadvantage: The board has no IO port pin detection functionDisadvantage: The board has no IO port pin detection functionDisadvantage: The board has no IO port pin detection function
MCU read and writeAdvantage: More coverage than competitorsAdvantage: More coverage than competitorsAdvantage: More coverage than competitorsNo
Less mcu coverageLess mcu coverage
Engine computer read and writeMore coverage than competitors.More coverage than competitors.More coverage than competitors.NoNo
Support CAN TC1762\TC1766\

TC1793\TC1797 R/W without pass

Disadvantage: small coverage of

CAN protocol read and write

Support CAN TC1762\TC1766\TC1793

\TC1797 R/W without pass

Less ECU coverage
Immobilizer module read and writeAdvantage: More coverage than competitors
Disadvantages: No solder-free board, no IO port pin detection function
Advantage: More coverage than competitorsAdvantage: More coverage than competitors
Disadvantages: No solder-free board, no IO port pin detection function
No
Disadvantages: No solder-free board, no IO port pin detection functionLess IMMO coverageLess IMMO coverage
Odometer/airbag module read and writeAdvantage: More coverage than competitorsAdvantage: More coverage than competitorsAdvantage: More coverage than competitorsNoNo
Less coverage
key identification generationAdvantage: There are more types of key identification;Advantage: There are more types of key identification;Advantage: There are more types of key identification;Yes
Disadvantages: Some key identification information is not comprehensive enough;Disadvantages: Some key identification information is not comprehensive enough;Disadvantages: Some key identification information is not comprehensive enough;Less coverageLess coverage
Write key via dumpYesYesYesNoNo
Less coverage
Renew/Unlock remoteYesYesYesNeed XP400 ProNeed XP1 ProYes
Frequency detectionYesYesYesNeed XP400 ProNeed XP1 ProYes
key tool functionGenerete universal keyYes
Need XP200/XP201/XP400/XP401/XP400PRO/XP401PRO
Yes, need XP200/XP201/XP400/

XP401/XP400PRO/XP401PRO

YesYesYesYes
APB112 chip simulationNeed APB112Need APB112Need APB112Yes
Ignition coil detectionNeed APB112NoNoYes
Diagnostic functionAuto VINYesYesYesYesYesNO
Read/clear DTCsYesYesYesYesYes
Read datastareamYesYesYesYesYes
read freeze frameYesYesYesYesYes
Read ECU informationYesYesYesYesYes
Active TestYesYesNo(coming soon)YesNo
Service functionYes (36)Yes (36)Yes(36)Yes(36)Yes(36)
Special functionsAll systemAll systemNo(coming soon)All systemNo
Online codingYes, does support Benz, Audi(only CN&HK), Skoda(only CN&HK)Yes, does not support Benz, Audi(only CN&HK), Skoda (CN&HK)NoNoNo
Offline codingYesYesNoNoNo
Hidden function flashingYes, except MercedesYes, except MercedesNoNoNo
Guided functionYes, excpet BMW, Benz, Land roverYes, excpet BMW, Benz, Land roverNoNoNo
Online programmingYes, part of BMW and Benz (not all function)Yes, IM608Pro will do part of BMW and Benz online programming (No all)NoNoNo
Cloud servicereport managementreport managementreport managementreport managementreport management
Remote expert C side(Only CN)
Other functionsSCAN VINRemote DeskRemote DeskRemote DeskSCAN VIN
SCAN LicenseD-PDUCANFD(Need converter)CANFD(Need converter)SCAN License
Remote DeskRP1210Remote Desk
D-PDUDoIP(Need converter)DoIP
RP1210CANFD(Need converter)CANFD
DoIP
CANFD
Remote ExpertUsabilitysince July 2022///the version is too low. Most of the functions have not been upgraded/
Advantage:
Immo and Diagnostic 2-in-1 in the same tablet, easy to use. Auto obtain and decode VIN
Order status and step prompts are clear. Synchronization of orders and connection steps;
Operational capability support: including activities, coupons, merchant order flow control, etc.
Disadvantage:
The expert side needs to be upgraded through PC Suit
Car brandsAdvantage:///Supports few car series, only supports Mercedes-Benz, BMW, Chrysler, GM cars, BMW does not support DoIP protocol/
Supports 140+ brands, except Tesla
Decode VIN, Auto VIN, smart identify vehicle info.
Intelligent identify protocol type (CAN, CANFD, DoIP), automatic identify DoIP communication.
Latency and StabilityBetter latency///Only supports transfer server mode/
B/C mode: transfer server+ P2P direct connection
ExtensionendoscopeYes (optional)Yes (optional)Yes(optional MV105/108)Yes(optional MV105/108)NO/

 

What’s new in Autel IM608 II/IM608 Pro II?

  • IM608/Pro II has improved firmware, Android 10, larger RAM, ROM, with new JVCI+ VCI.
  • Supports CAN protocol read and write without a password
  • Add bulit-in DoIP and CAN FD protocol (don’t need converter)
  • Support remote expert function