OTOFIX IM2 Adds Dodge RAM Promaster 2020 Key

 How to program keys to a Dodge RAM Promaster 2020 using OTOFIX IM2 key programmer.

This is a 2020 van and the other vans are very similar.

 

 

Preconditions:
Key on
Hazards on
Have all the keys you intended to work for the van, make sure they are cut
Battery charged
10mm socket and ratchet

Beginning in 2002 they have a secure gateway, you need bypass cable

 

Go to IM2, IMMO function->Auto Detect

Press OK to confirm vehicle information

Go to Control Unit->Read Immobilizer Password

Switch the ignition OFF and then ON again

Read password success

Then read Select Immobilizer/Smart system->Immobilizer (BCM)->Key learning

Read Immobilizer Data

Save Immo data

Select Make dealer key

The dealer key generation succeeded.

Select Key Learning

Learn key succeeded by OTOFIX IM2.

Test the new key.

www.obdii365.com

Autel IM608 Failed to Read BMW CAS3++ ISTAP DME ISN solution

 Problem:

Working on a 2012 BMW X5 CAS 3++ISTAP with Autel IM608.
Trying to read 32-digit ISN from BOSCH DME.
I have All the wires connected to the right pins. GBox2 is powered with 12v.
Jbox is connected to Gbox2.
First time around Gbox2 went through an update. Then I was hit with this screen, Any ideas what Can be the issue? Did Update mess up my gbox?

Solution:

 

Buy GBOX3 adapter. To read ISN from BMW Bosch DMEs, you will need g-box3 instead of Gbox2.

Or use gbox2 but give power to ecu from godiag breakout box or other sources…did i have same problem with my gbox2 dosent give 12v on output, i need to give from godiag bench tester to make it work.

unplugg all wires and 12v sources and try to reconect again, also on autel restart the process from 0. need to use 12v output from godiag.

 

 

Report:

Problem solved by gbox3.