Autel MaxiIM IM608 can add keys to Volvo XC60: Done!

This is a test report of a new universal key programming tool - Autel MaxiIM IM608, the replacement of Auro Otosys IM600.

Key programmer: Autel MaxiIM IM608
Car: volvo xc60

The test:
Go to Autel IM608 Volvo application

Manual selection

The Autel supports XC60 made in 2008-2018

Semi smart key - Semi smart key system (CAN)

Add semi smart keys

Note:

1. you're advised to use the USB cable to connect the vci device to improve connection speed
2. please turn off Bluetooth first and then use the USB connection

Note:

1. this function is applied to the learning of the semi smart key (to be inserted to start the vehicle)

the smart key can be learned successfully, but the remote control will be invalid

2. pls verify the type of the key first

Pls close all dors, insert the learned key into the key slot and turn the ignition on

Pls turn the ignition off
Remove the key from the key slot

Establishing vehicle communication...
Number of the key learned: 1
Maximum possible number of keys: 6

Establishing vehicle communication...
If a key is to be learned, insert the new key into the key slot and press learning button to continue
Notice: if the key pops out, pls press the key learning button first, then insert the key promptly

Establishing vehicle communication...
Key learning success

Key learned and id

Take out the key and insert it again to test the functionality

Done!
Autel IM608 is verified to be able to add new keys to Volvo XC60!


http://www.key-programmer.org/2019/03/26/autel-maxiim-im608-adds-volvo-xc60-semi-smart-key-success/