Autel IM608 Program 2022 Subaru Outback All Keys Lost

 Autel supports all smart keys lost function for some models as of 2022 Subaru Outback and Legacy with the large vertical dash screens.  

Here is the user working experience on Outback 2020-2022 all keys lost programming:

 

1.

I was able to program a key using an Autel IM508 along with an APB112 smart key simulator without replacing any parts. I now have a working key which should allow me to use other functions on the IM508 like removing the old keys.

The process is relatively easy. Using manual selection, pick your manufacturer, model, and year range from the menu. Find the Generate Analog Key option in the Immobilizer section and follow the on-screen steps; as long as it let’s you save the EEPROM data you should be good to proceed. Once that is done, it should direct you to connect the APB112 where it will create a simulated key. If that goes well, you can then use the Add Key prompt to create a new key (do not disconnect the APB112 during that process).

For reference, my vehicle is a 2020 Subaru Outback (NA) with the following part numbers:

SMT: 88801AN000
ESCL: 83126AN00B

 

 

2. 

I programmed key for 2022 subaru outback PTS today with AKL. ESCL and Smart Key Module were replaced with virgin. Programmed with Autel IM608. Still car wont crank. Security light blinks 5 times and then stays illuminated with IGN in ON position. Autel indicated the ECU will permit the car to start. I am thinking these new cars may be a 2 keys system. I am ordering a second key now and will program and see if the security light goes out. This car was also water salvaged and most modules were damaged and replaced.

Updated:

I was able to complete the job with autel. I had to learn the ECM even though it was never changed. Then the car started right up. Maybe it has to do with IMMO and ECU sync.