Auro OtoSys IM600 Program Nissan X-tail 2017 Smart Key

Another test perfect model: Nissan x-Trail 2017 smart key programming with Auro otosys im600/Otosys IM100 key programmer.



Connect IM600/IM100 with vehicle via OBD socket 

Select IMMO function->Nissan->X-tail->2014/2-2017/2 ->Immobilizer/Smart system->When performing key registration ->Register key

Set the vehicle to the following status and then press OK.

-Ignition switch or power switch: LOCK

-Hazard switch :ON

-P(A/T) or neutral (M/T)

-Battery voltage: more than 12.5V

-Steering: Not in fully locked

Establishing communication
Register smart key:

Operate according to the following procedures:

1.Press push-button ignition switch once. Check that indicator on push button ignition blinks

2. Contact the smart key to push-button ignition switch within 5 seconds. Check buzzer in combination meter sounds twice. Caution: Contact the logo off the smart key to the center of the ignition switch. 

3.Check that turn ignition switch changes automatically to the ON position and that security indicator turns on 5 times. Check that push button ignition switch turns ON

4. Turn ignition switch to the OFF position. Wait for 5 seconds or more

5.A maximum of 4 smart keys can be registered by repeating procedure from step 1 to Step 3 using unregistered smart keys.

Press Next to end key registration mode. 

After key registration operation. the system returns to key registration, it is necessary to end operation. Do following procudure:

1. Press Push-button ignition switch once, check that indicator on push button turns on

2.Contact the registrar smart key to push button ignition switch within 5 seconds buzzer in the combination meter sounds twice.

3.Turn ignition off.Wait for 5 seconds ot more

4. Check that key warning lamp blinks 5 times when driver door is opened or closed

5. Check that security indicator blinks at intervals of approximately 3 seconds while ignition switch is in the OFF position

6. Operate registered smart key outside of the vehicle. Check that door lock and unlock

The status indicates that key regurgitation mode ends. 

New smart key can start vehicle.

Success.

If you are interested in AURO OtoSys IM600, please contact us:
Whatsapp : +86 18259252285
Skype: obdii365.com
E-Mail：sales@obdii365.com

Auro OtoSts IM100 IM600 VW Software update to V2.30

Both Auro OtoSys IM100 and IM600 release new VW/Audi/Skoda/Seat software version V2.30 on April 23rd, 2018.


VW, Audi, Bentley, Skoda, Seat V2.30 
VW OPTIMIZE:
I. No disassembly needed for all IMMO functions of IMMO IV CAN Instrument under 2015-2017 vehicle model menu
2. Remote Add and Remote Learning functions added to IMMO IV CAN Instrument under 2015-2017 vehicle model menu
3. Key Learning on 2010-2013 Jetta models
4. Make Special Key function on 2010-2013 Jet models
5. Check Megamos 48 ID Validity function
6. Make IMMO V Key function improved, with auto key unlock during the process
7. Auto Backup IMMO function for K-line RB8 system when operated in Smart Mode
8. Auto Backup IMMO function for IMMO IV system when operated in Smart Mode

If you need IM600, please contact us:


Skype: obdii365.com

E-Mail:sales@obdii365.com

Auro OtoSys IM600 Diagnostic, IMMO Car Brand List

Auro OtoSys IM600 tablet diagnostic, key programming and ECU coding tool a lots of function menu & car list pictures



Setting menu:

Language: Multi language available

Programming VCI:

UP200 UP400 module for ecu coding/programming 

IM600 comes with J2534 box, support online programming (via Bluetooth)

Auro IM600 supported diagnostic car brands list

American models: EOBD, Chrysler, Dodge, Ford, GM, Jeep

European: 

EOBD, Abarth, Afla, Aston Martin, Audi, Bentley, Benz,Sprinter, BMW, Bugatti, Citroen, Dacia, Ferrari, Fiat, FordEU,Jaguar, Lamborghini, Lancia, Land rover,LT3, Maserati, Maybach, MINI,Opel, Peugeot, Porsche, Renault, Rolls-Royce, Saab, Seat,Skoda, Smart, Vauxhall, Volvo, VW, VW CV

Asian:

EOBD, Acura, Daewoo, Daihatsu, Honda, Hyundai, HyundaiCV,Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Nissan GTR, Samsung, Scion, SsangYoung, Subaru, Suzuki, Toyota, Fuso, Perodua, Proton, TATA, Mahindra

Im600 Asian Fuso diagnostic both 12V and 24V vehicles 

OtoSys IM600 supported service function menu

●Direct access to complete service functions including:

●Relearn parking brake pad after replacement (EPB)

●Support forced DPF regeneration and adjusting injectors (DPF)

●Reset Steering angle sensor (SAS)

●Reset service mileage and service intervals (Oil Reset)

●Support TPMS sensor relearn (TPMS)

●Support battery registration and reset (BMS)

and more

Auro OtoSys IM600 Immobilizer key programming list 

American: Chrysler, Dodge,GM, Hummer, Jeep , Ford*

Ford key programming:

You can use diagnostic —> Ford —> select model and learn key
But you have to input Outcode
This is also the way to do it ford programming with Mazda application tribute

More Ford models will be update in the end of June, 2018.

European:

Citroen, DS, Fiat, Jaguar, Land rover, Maserati, Opel, Peugeot, Renault, Saab, Audi, Bentley, BMW, Mini, Seat, Skoda, VW

Asian:

Acura, Honda, Hyundai, Infiniti, Kia, Lexus, Mazda, Mitsubishi, Nissan, Subaru, Suzuki, Toyota

Chinese IMMO car list:

For OtoSys IM100, IM600 detail car model & year, please check official website for detail car list:

http://pro.aurodiag.com/measurecarAPP-1-1.html?m=94&operatorType=5&pageNo=0

*If you need IM600, please contact Email: Sales@OBDII365.com
Skype: OBDII365.com

Auro OtoSys IM100 Program Nissan Navara D40 2011 All Keys Lost

New feedback: Nissan Navara D40 2011 all keys lost done with Auro OtoSys IM100/IM600 tablet key programmer.



Connect IM100/IM600 tablet and VCI with vehicle
Select IMMO function>Nissan->System selection->Immobilizer/Smart system->Immobilizer/Smart system->When performing key registration->Register/Erase key







Insert ignition key into ignition key cylinder and switch ignition to ON position

This procedure erases all registered key ID.Therefore,all of the customer's keys should be obtained

before starting this procedure



Perform key registration. Operate according to the following procedures.


1:Remove inserted ignition key fruni ignition key cylinder.

2:tnsert unregistered ignition key into ignition key cylinder, turn ignition switch to the ON position, and then wait for 5 seconds or more.

3:Check that security indicator blinks 5 times.

4:Turn ignition switch to the OFF position, remove ignition key, and then wait for 3 seconds or more.

5:A maximum of 5 ignition keys can be registered by repeating procedures from step 2 to step 4 using unregistered ignition keys.  Touch OK to end  OtoSys IM100 key registration mode.



Complete Registration Key.


After key registration operation, the system returns to key registration mode. Therefore, it is necessary to end operation. Operate according to the following procedures.


1:Insert ignition key into key cylinder and turn ignition switch to the ON position.

2:For models with remote control engine starter, buzzer of remote control engine starter sounds once. Registration unsucsessful if buzzer does not sound or sounds 3 times.

3:Turn ignition switch to the OFF position, remove ignition key, and then wait for 3 seconds or more.

4:Check that security indicator blinks at intervals of approximately 3 seconds.



Operate according to the following procedures.

1:Check that each of all registered key can start engine. Touch [End].

For remote control engine starter, check operation according to remote control engine starter installation manual.



Succeed.



http://www.obdii365.com/


If you need IM600, please contact :
Email: Sales@OBDII365.com
Skype: OBDII365.com

Auro OtoSys IM100 IM600 Update Feature June July 2018

Q1: Will Auro IM100/IM600 make key on Australian Ford and Holden?

Q2: I cannot see Ford IMMO option in IM100, does IM100 support Ford key programming?

A:

These features currently is not yet ready in IM100/IM600, but Auro diag soon release more immo functions in the the coming months.

Update Coming List

Region	Make	Description ETA	Auro OtoSys  IM100	IM600
USA	Ford	Support Key learning with C-MAX. Escape,Kuga, Expedition F-150 F-250 F-350 EcoSport ,and other models	YES	YES
	GM	Supports key learning on 2017 Buick, Cadillac, Chevrolet and other models	YES	YES
Australia	Holden	Support key learning on Astra,Barina, Clibra,Colorado. Combo, Cruze and other models	YES	YES
	Ford	Supports key learning on Falcon,Fiesta,Focus,Kuga,Mondeo, Transit and other models	YES	YES
Asia	TATA	Supports key learning on Arta, Indian, Vista, Manza, Zest, Bolt, Tiago and other models	YES	YES
	Mahindra	Supports key learning on Scorpio, Xylo, XUV500,Quanto,NuvoSport and other models	YES	YES
	Maruti Suzuki	Supports key learning on Alto 800,Swift, Baleno.S-cross,Celerio and other models	YES	YES
	Hyundai/Kia	Support IMMO Password reading for 46,47 and 8A chip smart keys	YES	YES
	Mitsubishi	Supports all keys lost on models with CAN Protocol, such as ASX and Outlander	YES	YES
	Toyota/Lexus	Supports all keys lost for four smart key types including:94/D4,88/8A,A9 and 98	YES	YES
Europe	Volvo	Supports smart key programming, including smart key learning and all smart keys lost	YES	YES
	BMW	Supports key learning, all keys lost and ECU renew for CAS4/4+system	YES	YES
	BMW	Supports key learning, all keys lost and ECU renew for CAS3/3+system	YES	Supports with UP400
	Benz	Supports key learning, ELV read & write(OBD), ELV read & write(IR) for DAS3 system Supports IR key read & write for IR key system	YES	YES
	VAG	Support IMMO IV Megamos 48 key programming	Pay as you go	Pay as you go+ token
	VAG	Supports Read IMMO data for more Engine systems	YES	YES

*If you need IM600, please contact Email: Sales@OBDII365.com
Skype: OBDII365.com

http://www.obdii365.com/info/auro-otosys-im100-im600-update-coming-list-54566.html

Auro OtoSys IM100 Clone VW Jetta 2014 Megamos 48 Key

We successfully cloned an original 2014 Volkswagen Jetta key onto a KeylessGo Megamos 48 transponder using the Auro OtoSys IM100 ( which will also work on an IM600).


Connect IM100 and programming adapter with vehicle via OBD socket
Select VW->Smart Mode



Reading vehicle information


Analyzing immo type: Megamos 48 key, #31 key blanks


OtoSys IM100 read current number of keys


Select Copy Megamos 48 key


3 Steps to complete ID48 key cloning

Step 1. Read Immo data
a blank key must be a cloned key (ID id modifiable )


Insert the start key and turn ignition switch to ON position

Reading immo data wait until completed


Step 2. Read and write key ID


Select the key ID already existed in the vehicle in the drop-down list to perform ke copying operation



Puit a blank key/key chip in the programmer key hole and then Press OK



Write key ID complete


Step 3. Make dealer key

Key cloning success



Test the new key and start vehicle.

http://www.obdii365.com/wholesale/auro-otosys-im100-automotive-diagnostic-tool.html