Program Audi A6 2011 All Keys Lost with Auro OtoSys IM600

Car model: Audi A6 3.0 TDI 2011
Key type: 8E chip transponder
Purpose: program dealer key when all keys lost
Method: on the bench
Devices used:
8E transponder and key blank
Auro OtoSys IM600/ Autel MaxiIM IM608 key programmer

Major progress:
1.Read EZS
2.Load EZS
3.Make dealer key
4.Learn key

Procedure:
1.Read IMMO data from EZS

Connect UP400 eeprom programmer with EZS follow the wiring diagram (you can check the wiring in IM600/IM608 menu)
Select Read EZS data by dump (All key lost)-> Read data by dump

Reading EZS dump in process, the green indicator on up400 programmer will turn on

Read EEPROM from EZS success. Save data

Save data success. Display vehicle information, PIN, CS, key number etc

2. Load EZS Data
set up bench connection

Select EZS-Kessy AUDI A6/Q7->Load EZS data

Load data saved in step 1 and confirm vehicle information

3.Make dealer key
Select Make dealer key

Put a blank key or chip into Autel IM608 xp400/ IM600 up400 programmer keyhole and press OK to continue

Communication
Make dealer key success

4. Learn key
Select Learn key

Remove key chip form keyhole
Insert chip into key blank and turn on ignition
Select number of keys need to learn

Turn ignition OFF
Insert the sequence keys that need to be learned and turn ignition switch to CRANK.
For each key, wait for the steering column lock status to become unlocked is need.

Key learning completed.
Done.
www.obdii365.com

Related Post:
Program Audi A3 2012 All Keys Lost with Auro OtoSys IM100
Auro OtoSys IM600 Program Audi Q5 2015 All Keys Lost