We have introduced how to program VW VDO NEC+24C64 all keys lost with Autel IM508/IM608/IM608 Pro service mode via dump previously. Here we have another way to get it done.
Autel IM508/IM608 VW Golf VDO NEC+24C64 All Keys Lost via Dump
Let’s get started.
Example: VW Golf 6 cluster instrument NEC23C64 all keys lost on bench with gbox, put polo to cable.
Select IMMO-> VW-> Expert Selection-> Immo IV Instrument CAN->VDO+ NEC24C64->Enter Service Mode All Keys Lost (G-box)
Immo data will be directly read after performing this operation.
Check wiring diagram in im608. Make a GND needle by yourself.
Connect the GND wire of the g-box.
Operation completed.
Disconnect the ground wire of the G-box from the contact.
Start reading immo data
Read CS, PIN, MAC etc, save immo data.
Then select Make Dealer Key function
Place a black key/chip into the key slot of the programmer and press OK
Generate dealer key successfully
Then perform learn key.
No comments:
Post a Comment